Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 02-25-2020, 06:56 PM   #1
Schoelkopf94
 
Join Date: Feb 2017
Location: Indiana
Age: 27
Posts: 4
Trader Rating: (0)
Schoelkopf94 is an unknown quantity at this point
Feedback Score: 0 reviews
Z32 maf issues with s14 ka24det

Hey guys,
I just finished my kat build and I am stumped. I am running at 11 afr up to 12 when reved.

Jwt ecu tuned for z32 maf and 370cc injectors

My maf has 10-12 volts on all three wires. I checked the wiring about 13 times now. Everything checks out according to jwts guide. I also bought a brand new maf and the voltages are the same.
No continuity across the maf terminals except the two grounds. Nothing looks burnt on the inside. I also opened the ecu and didn't see anything burnt.

I can not figure out what is happening. Pls help. Can I check the ecu in a different way? Does anyone know how to check the maf outside of the car and what the resistances should be across the terminals?
Schoelkopf94 is offline   Reply With Quote
Sponsored Links
Old 02-26-2020, 04:11 PM   #2
anthony_240
Zilvia Junkie
 
anthony_240's Avatar
 
Join Date: Nov 2016
Location: Los Angeles
Age: 30
Posts: 489
Trader Rating: (3)
anthony_240 is an unknown quantity at this point
Feedback Score: 3 reviews
Do you have a link to how jwt wants you to set it up? When you disconnect the MaF, do you still have 12v at the wires?


Sent from my iPhone using Tapatalk
anthony_240 is offline   Reply With Quote
Old 02-28-2020, 09:11 AM   #3
Schoelkopf94
 
Join Date: Feb 2017
Location: Indiana
Age: 27
Posts: 4
Trader Rating: (0)
Schoelkopf94 is an unknown quantity at this point
Feedback Score: 0 reviews
No I don't. I followed JWTs guide for the maf wiring but the ecu was purchased used. I called jwt and talked with a tech and he believes there is an issue with my harness. I will be looking into that tomorrow
Schoelkopf94 is offline   Reply With Quote
Old 02-28-2020, 09:14 AM   #4
Schoelkopf94
 
Join Date: Feb 2017
Location: Indiana
Age: 27
Posts: 4
Trader Rating: (0)
Schoelkopf94 is an unknown quantity at this point
Feedback Score: 0 reviews
Also, no when the maf is unplugged I only get 12v on the proper wire. I will also be bench testing my mafs because that fact alone tells me the maf is bad, just hard to believe two behave exactly the same.
Schoelkopf94 is offline   Reply With Quote
Old 03-01-2020, 07:18 AM   #5
S14rebuild
BANNED
 
Join Date: May 2019
Location: Florida-FAIL
Posts: 2,497
Trader Rating: (8)
S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild S14rebuild
Feedback Score: 8 reviews
If u have on 1 wire with 12v going in....and its pluged into the maf and now 3 wires have 12v comen out..maf is shot.
S14rebuild is offline   Reply With Quote
Old 03-01-2020, 07:39 AM   #6
Schoelkopf94
 
Join Date: Feb 2017
Location: Indiana
Age: 27
Posts: 4
Trader Rating: (0)
Schoelkopf94 is an unknown quantity at this point
Feedback Score: 0 reviews
After testing continuity in the harness and bench testing both of my mafs, I've decided to buy another maf. Harness was good but both mafs showed incorrect resistances across the signal terminal and power terminal. Hope that was all it was.
Schoelkopf94 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™