Ka24de timing help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

staying_chuki · 03-22-2018, 05:31 PM

So i recently did a rebuild on my s13, everything was simple as usual but im having issues with the timing. Everything went in and lined up but it seems tight and off centered

. All the tensioners are in, but it was uber tight even without the upper tensioner. Lower tensioner seems like its barely even doin anything. Im not really sure whats going on so any help would be appreciated.

Sent from my iPhone using Tapatalk

supersayianjim · 03-22-2018, 08:08 PM

so, you are saying it's too tight?

staying_chuki · 03-23-2018, 06:30 AM

Quote:

Originally Posted by supersayianjim

so, you are saying it's too tight?

Pretty much yeAh.

Sent from my iPhone using Tapatalk

jedi03 · 03-23-2018, 07:37 AM

from what I can see your cam timing is off...cant say for sure on the rest tho...

staying_chuki · 03-23-2018, 09:03 AM

Quote:

Originally Posted by jedi03

from what I can see your cam timing is off...cant say for sure on the rest tho...

What seems off about the timing? Im about to pull the oil pan and front cover again and see whats going on but ill check everything else first to try and avoid that lol.

Sent from my iPhone using Tapatalk

staying_chuki · 03-23-2018, 09:48 AM

So slight update, i pulled everything apart up top and it fixed my issue kind of. When i take out the bolt holding the idler sprocket everything is fine and dandy. Not super tight, and tensioners look good. But when i tighten that bolt down it seems to completely pull the lower tensioner inward and make everything tight again. Im not sure what wrong here so im probably going to pull the cover and go from there but if anyone has some advice itd be appreciated

Sent from my iPhone using Tapatalk

staying_chuki · 03-23-2018, 01:32 PM

Just to follow up on this in case somebody else runs into this shit, i didnt have the shaft in the middle of the idler sprocket to line it all up. Problem is solved and everything lines up good now.

Sent from my iPhone using Tapatalk

03-22-2018, 05:31 PM	#1
staying_chuki Leaky Injector Join Date: Feb 2018 Location: Ocala Fl Posts: 140 Trader Rating: (1) Feedback Score: 1 reviews	Ka24de timing help So i recently did a rebuild on my s13, everything was simple as usual but im having issues with the timing. Everything went in and lined up but it seems tight and off centered. All the tensioners are in, but it was uber tight even without the upper tensioner. Lower tensioner seems like its barely even doin anything. Im not really sure whats going on so any help would be appreciated. Sent from my iPhone using Tapatalk

03-22-2018, 08:08 PM	#2
supersayianjim Nissanaholic! Join Date: Jan 2010 Location: location X Posts: 1,807 Trader Rating: (10) Feedback Score: 10 reviews	so, you are saying it's too tight? __________________ http://www.240sxforums.com/forums/rb...ject-s-rb.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-23-2018, 07:37 AM	#4
jedi03 Nissanaholic! Join Date: Jul 2008 Location: albuquerque Posts: 1,784 Trader Rating: (8) Feedback Score: 8 reviews	from what I can see your cam timing is off...cant say for sure on the rest tho...

03-23-2018, 09:48 AM	#6
staying_chuki Leaky Injector Join Date: Feb 2018 Location: Ocala Fl Posts: 140 Trader Rating: (1) Feedback Score: 1 reviews	So slight update, i pulled everything apart up top and it fixed my issue kind of. When i take out the bolt holding the idler sprocket everything is fine and dandy. Not super tight, and tensioners look good. But when i tighten that bolt down it seems to completely pull the lower tensioner inward and make everything tight again. Im not sure what wrong here so im probably going to pull the cover and go from there but if anyone has some advice itd be appreciated Sent from my iPhone using Tapatalk

03-23-2018, 01:32 PM	#7
staying_chuki Leaky Injector Join Date: Feb 2018 Location: Ocala Fl Posts: 140 Trader Rating: (1) Feedback Score: 1 reviews	Just to follow up on this in case somebody else runs into this shit, i didnt have the shaft in the middle of the idler sprocket to line it all up. Problem is solved and everything lines up good now. Sent from my iPhone using Tapatalk