r32 gtr wheel specs - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

USofAustralia · 04-22-2015, 05:41 PM

G'day,

looking to purchase some wheels for my R32 GTR (in purchase process) but unsure on set up i should go with. (spec wise) looking for something aggressive but not over the top, not looking to run stupid amounts of camber, etc.

anyways, i was looking at going 18x9.5 +12 (squared, emotion T7R/CR Ultimate, or TE37's) with 245/40/18 Falken Azenis TR615K.

any suggestions?

Cheers.

Almighty So · 05-12-2015, 05:02 PM

I'd go with 18x9.5 +12 squared emotion t7r/cr ultimate/ or te37s with a 245/40/18 falken azenis tr615k.

BossHogg · 05-17-2015, 12:50 AM

I believe it mainly depends on your ride height. You should be fine if you don't have the super low. If you do, you may require a fender roll and or some camber. Tire size would also play a roll. 265/35/18 seems to be the norm for this wheel size.

Sileighty_85 · 05-18-2015, 03:20 AM

might wanna go with a higher offset around +20. Have a buddy that just bought some 18X10 +26 works and they are gonna require a roll

04-22-2015, 05:41 PM	#1
USofAustralia Join Date: Apr 2015 Location: Northern Territory Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	r32 gtr wheel specs G'day, looking to purchase some wheels for my R32 GTR (in purchase process) but unsure on set up i should go with. (spec wise) looking for something aggressive but not over the top, not looking to run stupid amounts of camber, etc. anyways, i was looking at going 18x9.5 +12 (squared, emotion T7R/CR Ultimate, or TE37's) with 245/40/18 Falken Azenis TR615K. any suggestions? Cheers.

05-17-2015, 12:50 AM	#3
BossHogg Zilvia Addict Join Date: Aug 2011 Location: america Posts: 998 Trader Rating: (16) Feedback Score: 16 reviews	I believe it mainly depends on your ride height. You should be fine if you don't have the super low. If you do, you may require a fender roll and or some camber. Tire size would also play a roll. 265/35/18 seems to be the norm for this wheel size. __________________

05-18-2015, 03:20 AM	#4
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	might wanna go with a higher offset around +20. Have a buddy that just bought some 18X10 +26 works and they are gonna require a roll __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode