GA Don't pass this up sale!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

owned by pandas · 11-26-2011, 01:36 PM

I am selling all of the stuff I have left from my garage sale. All items are located in GEORGIA. Willing to ship at buyers expense. Most parts are used some are new, everything I am selling works.

If you have any questions about any of the parts feel free to email/text/call(easiest way for contact). I wont be able to get on all the forums everyday so that's the best way for contact.

Contact information:
Email: [email protected]
Phone: 404-438-3571
Name: June(Turbo Negro)

NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!

Trades are welcome but be reasonable. Please to ask me to trade a 400 dollar turbo for a safc1 and a 12 disc cd changer out of a cutlass...Think about it, would you trade for the part....

SPECIFIC NISSAN STUFF:

BUILT SR20DET REDTOP LONG BLOCK( FRESH REBUILD-ZERO MILES, ACL BEARINGS,COSWORTH HEAD GASKET, ARP HEAD STUDS, BRIAN CROWER STAGE 2 VALVETRAIN) ASKING 1500

SR20DET RUNNING COMPLETE SWAP--MADE 398 AT 16PSI---STRONG ENGINE. THIS ENGINE HAS A REBUILT BOTTOM END, NEW BEARINGS, ALL GASKETS REPLACED, BLACKTOP PISTONS, ISIS 2871R(LESS THAN 1500 MILES, 550CC INJECTORS, STAIN STEEL LINES, FREDDY INTAKE MANIFOLD, MEGAN TURBO MANIFOLD, BRIAN CROWER STAGE 2 VALVETRAIN, COSWORTH HEAD GASKET, ARP HEAD STUDS, EXEDY STAGE 2 CLUTCH, DOWNPIPE, GREDDY INTERCOOLER WITH PIPING, WIRING HARNESS, ECU(WIRED FOR S13), TRANNY---SOLD!!!!!!!!!!!!!!

Perfect 370Z Wheels, tires are usless on the two:SOLD!!!!!!!!!!!!!!!!!!

MB WEAPONS(5X114-17X8 FRONT 17X9 REAR) WITH GOOD TIRES: ASKING 525 FIRM.

KA24DE TRANNY(ASKING 200), DRIVESHAFT-S13 AND S14 AUTO(ASKING 60), S14 AXLES(ASKING 30 A PIECE)

SR20DET RWD GREDDY OIL PAN WITH BOLTS BARELY USED(ASKING 250)

SR20DET RWD HEAD AND INTAKE(STOCK) COMPLETE(ASKING 150)

SR20DET BRIAN CROWER CAMS 272 SET AND 264 SET NO CHIPS NO PROBLEMS(ASKING 250 FOR A PAIR) 264'S ARE SOLD!!!!! STILL HAVE 272S

Z32 TT CALIPERS, BRAND NEW NEVER INSTALLED(SOLD!!!!!!!!!!!!!!!

Z32 FRONT SPINDLES (ASKING 50 FOR BOTH FRONTS)

KA ECUS(CONTACT FOR PRICING)

KA24DE AFTERMARKET INTAKE MANIFOLD- SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!

I HAVE MORE PARTS I HAVENT LISTED, ALTERNATORS, WATERPUMPS, POWERSTEERING PUMPS ETC....SR, RB, KA, ETC

UPGRADES FOR EVERYONE:

T3 turbo GOOD CONDITION SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!

GT45 TURBO(ASKING 160)

DURAMAX TURBO(ASKING 400)

HOLSET TURBO GOOD CONDITION, MADE 381 AT 16 PSI ON A STOCK 1JZGTE...GREAT TURBO FOR LARGE 4 CYLINDER AND 6 CYLINDER!!!
ASKING 500

GREDDY PROFEC B SPEC 2 (NO HARNESS NO SOLENOID) SOLD!!!!!!!!!!!!!!!!!

EVO 8 INTERCOOLER-GOOD FOR 400+HP GREAT SIZE FOR TOP OR V MOUNT SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!!

WASTEGATES(GREDDY AND TIAL) (ONLY HAVE TWO LEFT)

FUEL CELLS (ASKING 40 FOR SMALLER AND 75 FOR BIGGER)

BryanR00 · 11-26-2011, 07:43 PM

Great prices! GLWS!

Also, how did you like that ISIS turbo? I was thinking of getting one.

sharpe_corners · 11-26-2011, 07:51 PM

LOL at spray bombed "brand new" z32 calipers... lol

Korey · 11-26-2011, 09:09 PM

Good stuff and good seller.

RB180sxChris · 11-26-2011, 09:26 PM

Looks like a lot of legit parts glws

Nkelley · 11-27-2011, 12:14 AM

are you flexible on the xcessive intake? im interested...

owned by pandas · 11-27-2011, 06:32 AM

Im flexable on most prices

owned by pandas · 11-27-2011, 06:33 AM

Quote:

Originally Posted by BryanR00

Great prices! GLWS!

Also, how did you like that ISIS turbo? I was thinking of getting one.

It is a great turbo depending on the engine and parts to back it up

Highlo630 · 11-27-2011, 07:26 AM

Wategates mm? Price? Spring? Pm me pls

scarface_613 · 11-27-2011, 07:30 AM

If anyone is willing to buy the two 17x8, i want the 17x9, i have two now but would like to complete my set, and im sure the OP would rather sell as a whole

boms · 11-27-2011, 07:37 AM

more info on the crower 272 Used? New? how long were they ran? thanks

97nismo · 11-27-2011, 08:19 AM

interested in the z wheels...

ghudson · 11-27-2011, 09:40 AM

Quote:

Originally Posted by 97nismo

interested in the z wheels...

you would..

97nismo · 11-27-2011, 10:44 AM

^ ha...........

owned by pandas · 11-27-2011, 04:07 PM

PMs replied back to.

CmR333 · 11-27-2011, 07:02 PM

pm me a price on the evo ic, hks bov and one of the tial wg's..thanks im in fl so shipping is cheap lol.

owned by pandas · 11-28-2011, 10:28 AM

All people pm'med.

Walperstyle · 11-28-2011, 10:42 AM

should post if driveshaft is for abs or non abs

owned by pandas · 11-28-2011, 11:34 AM

S13 Driveshaft is manual...
I also have S14 driveshafts but they are auto.

Nkelley · 11-28-2011, 06:58 PM

intake mani sold to me

owned by pandas · 11-30-2011, 10:04 AM

bumpersasdfsafsdfs

owned by pandas · 12-02-2011, 08:45 AM

Bumpers pms replied.

MomentumDrift-Tyler · 12-02-2011, 09:14 AM

dang intake mani sold? ill give 400 now

LuckyRPS13 · 01-11-2012, 05:17 PM

not bad pricing I may hit you up when some money rolls in

street240sx · 01-11-2012, 05:25 PM

Quote:

Originally Posted by LuckyRPS13

not bad pricing I may hit you up when some money rolls in

keep in mind this thread is 2 months old....

LuckyRPS13 · 01-11-2012, 05:53 PM

even so does nto mean he has sold every thing. I did not spot a new thread on it. I have been looking

owned by pandas · 01-19-2012, 04:17 PM

Sorry guys for being off for a while, I had to attend to some business...Some of the stuff is still available.

2jdm4you · 01-19-2012, 04:38 PM

Got an 95 manual ecu's?

owned by pandas · 01-19-2012, 06:31 PM

I believe I do actually, I can check tomorrow.

charles13 · 01-19-2012, 10:28 PM

Anything wrong with the gt45?

11-26-2011, 01:36 PM	#1
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	Don't pass this up sale!!!!! I am selling all of the stuff I have left from my garage sale. All items are located in GEORGIA. Willing to ship at buyers expense. Most parts are used some are new, everything I am selling works. If you have any questions about any of the parts feel free to email/text/call(easiest way for contact). I wont be able to get on all the forums everyday so that's the best way for contact. Contact information: Email: [email protected] Phone: 404-438-3571 Name: June(Turbo Negro) NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!!NO LOW BALLERS!!!!!! Trades are welcome but be reasonable. Please to ask me to trade a 400 dollar turbo for a safc1 and a 12 disc cd changer out of a cutlass...Think about it, would you trade for the part.... SPECIFIC NISSAN STUFF: BUILT SR20DET REDTOP LONG BLOCK( FRESH REBUILD-ZERO MILES, ACL BEARINGS,COSWORTH HEAD GASKET, ARP HEAD STUDS, BRIAN CROWER STAGE 2 VALVETRAIN) ASKING 1500 SR20DET RUNNING COMPLETE SWAP--MADE 398 AT 16PSI---STRONG ENGINE. THIS ENGINE HAS A REBUILT BOTTOM END, NEW BEARINGS, ALL GASKETS REPLACED, BLACKTOP PISTONS, ISIS 2871R(LESS THAN 1500 MILES, 550CC INJECTORS, STAIN STEEL LINES, FREDDY INTAKE MANIFOLD, MEGAN TURBO MANIFOLD, BRIAN CROWER STAGE 2 VALVETRAIN, COSWORTH HEAD GASKET, ARP HEAD STUDS, EXEDY STAGE 2 CLUTCH, DOWNPIPE, GREDDY INTERCOOLER WITH PIPING, WIRING HARNESS, ECU(WIRED FOR S13), TRANNY---SOLD!!!!!!!!!!!!!! Perfect 370Z Wheels, tires are usless on the two:SOLD!!!!!!!!!!!!!!!!!! MB WEAPONS(5X114-17X8 FRONT 17X9 REAR) WITH GOOD TIRES: ASKING 525 FIRM. KA24DE TRANNY(ASKING 200), DRIVESHAFT-S13 AND S14 AUTO(ASKING 60), S14 AXLES(ASKING 30 A PIECE) SR20DET RWD GREDDY OIL PAN WITH BOLTS BARELY USED(ASKING 250) SR20DET RWD HEAD AND INTAKE(STOCK) COMPLETE(ASKING 150) SR20DET BRIAN CROWER CAMS 272 SET AND 264 SET NO CHIPS NO PROBLEMS(ASKING 250 FOR A PAIR) 264'S ARE SOLD!!!!! STILL HAVE 272S Z32 TT CALIPERS, BRAND NEW NEVER INSTALLED(SOLD!!!!!!!!!!!!!!! Z32 FRONT SPINDLES (ASKING 50 FOR BOTH FRONTS) KA ECUS(CONTACT FOR PRICING) KA24DE AFTERMARKET INTAKE MANIFOLD- SOLD!!!!!!!!!!!!!!!!!!!!!!!!!! I HAVE MORE PARTS I HAVENT LISTED, ALTERNATORS, WATERPUMPS, POWERSTEERING PUMPS ETC....SR, RB, KA, ETC UPGRADES FOR EVERYONE: T3 turbo GOOD CONDITION SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!! GT45 TURBO(ASKING 160) DURAMAX TURBO(ASKING 400) HOLSET TURBO GOOD CONDITION, MADE 381 AT 16 PSI ON A STOCK 1JZGTE...GREAT TURBO FOR LARGE 4 CYLINDER AND 6 CYLINDER!!! ASKING 500 GREDDY PROFEC B SPEC 2 (NO HARNESS NO SOLENOID) SOLD!!!!!!!!!!!!!!!!! EVO 8 INTERCOOLER-GOOD FOR 400+HP GREAT SIZE FOR TOP OR V MOUNT SOLD!!!!!!!!!!!!!!!!!!!!!!!!!!!! WASTEGATES(GREDDY AND TIAL) (ONLY HAVE TWO LEFT) FUEL CELLS (ASKING 40 FOR SMALLER AND 75 FOR BIGGER) Last edited by owned by pandas; 01-19-2012 at 04:21 PM..

11-27-2011, 08:19 AM	#12
97nismo Nissanaholic! Join Date: Oct 2008 Location: Asheville Posts: 2,130 Trader Rating: (53) Feedback Score: 53 reviews	interested in the z wheels... __________________ Feedback: http://zilvia.net/f/itrader.php?u=78978

11-27-2011, 10:44 AM	#14
97nismo Nissanaholic! Join Date: Oct 2008 Location: Asheville Posts: 2,130 Trader Rating: (53) Feedback Score: 53 reviews	^ ha........... __________________ Feedback: http://zilvia.net/f/itrader.php?u=78978

11-28-2011, 10:42 AM	#18
Walperstyle Nissanaholic! Join Date: Nov 2004 Location: Alberta, Red Derp Age: 40 Posts: 1,729 Trader Rating: (0) Feedback Score: 0 reviews	should post if driveshaft is for abs or non abs __________________ KA-T ORG-Function over Flush

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-26-2011, 07:43 PM	#2
BryanR00 Leaky Injector Join Date: Sep 2010 Location: Mobile, Al Age: 30 Posts: 120 Trader Rating: (1) Feedback Score: 1 reviews	Great prices! GLWS! Also, how did you like that ISIS turbo? I was thinking of getting one.

11-26-2011, 07:51 PM	#3
sharpe_corners Zilvia FREAK! Join Date: Feb 2010 Location: Hamilton/St Catharines Posts: 1,460 Trader Rating: (29) Feedback Score: 29 reviews	LOL at spray bombed "brand new" z32 calipers... lol

11-26-2011, 09:09 PM	#4
Korey Join Date: Nov 2010 Location: Marietta, GA Posts: 28 Trader Rating: (3) Feedback Score: 3 reviews	Good stuff and good seller.

11-26-2011, 09:26 PM	#5
RB180sxChris Zilvia Addict Join Date: Feb 2010 Location: NEW JERSEY Age: 33 Posts: 654 Trader Rating: (17) Feedback Score: 17 reviews	Looks like a lot of legit parts glws

11-27-2011, 12:14 AM	#6
Nkelley Zilvia Member Join Date: May 2010 Location: phoenix, az Age: 31 Posts: 283 Trader Rating: (10) Feedback Score: 10 reviews	are you flexible on the xcessive intake? im interested...

11-27-2011, 06:32 AM	#7
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	Im flexable on most prices

11-27-2011, 07:26 AM	#9
Highlo630 Leaky Injector Join Date: Nov 2011 Location: west palm beach Age: 38 Posts: 64 Trader Rating: (1) Feedback Score: 1 reviews	Wategates mm? Price? Spring? Pm me pls

11-27-2011, 07:30 AM	#10
scarface_613 Zilvia Member Join Date: Mar 2008 Location: Tampa Posts: 187 Trader Rating: (1) Feedback Score: 1 reviews	If anyone is willing to buy the two 17x8, i want the 17x9, i have two now but would like to complete my set, and im sure the OP would rather sell as a whole

11-27-2011, 07:37 AM	#11
boms Zilvia Member Join Date: Feb 2011 Location: sc Age: 32 Posts: 167 Trader Rating: (0) Feedback Score: 0 reviews	more info on the crower 272 Used? New? how long were they ran? thanks

11-27-2011, 04:07 PM	#15
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	PMs replied back to.

11-27-2011, 07:02 PM	#16
CmR333 Zilvia Member Join Date: Oct 2008 Location: jacksonville fl Age: 38 Posts: 173 Trader Rating: (4) Feedback Score: 4 reviews	pm me a price on the evo ic, hks bov and one of the tial wg's..thanks im in fl so shipping is cheap lol.

11-28-2011, 10:28 AM	#17
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	All people pm'med.

11-28-2011, 11:34 AM	#19
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	S13 Driveshaft is manual... I also have S14 driveshafts but they are auto.

11-28-2011, 06:58 PM	#20
Nkelley Zilvia Member Join Date: May 2010 Location: phoenix, az Age: 31 Posts: 283 Trader Rating: (10) Feedback Score: 10 reviews	intake mani sold to me

11-30-2011, 10:04 AM	#21
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	bumpersasdfsafsdfs

12-02-2011, 08:45 AM	#22
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	Bumpers pms replied.

12-02-2011, 09:14 AM	#23
MomentumDrift-Tyler Leaky Injector Join Date: Jan 2011 Location: Mooresville Posts: 113 Trader Rating: (4) Feedback Score: 4 reviews	dang intake mani sold? ill give 400 now

01-11-2012, 05:17 PM	#24
LuckyRPS13 Zilvia FREAK! Join Date: Mar 2009 Location: Louisville Ky Age: 38 Posts: 1,152 Trader Rating: (23) Feedback Score: 23 reviews	not bad pricing I may hit you up when some money rolls in

01-11-2012, 05:53 PM	#26
LuckyRPS13 Zilvia FREAK! Join Date: Mar 2009 Location: Louisville Ky Age: 38 Posts: 1,152 Trader Rating: (23) Feedback Score: 23 reviews	even so does nto mean he has sold every thing. I did not spot a new thread on it. I have been looking

01-19-2012, 04:17 PM	#27
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	Sorry guys for being off for a while, I had to attend to some business...Some of the stuff is still available.

01-19-2012, 04:38 PM	#28
2jdm4you Zilvia Addict Join Date: Sep 2011 Location: NWI Age: 26 Posts: 627 Trader Rating: (13) Feedback Score: 13 reviews	Got an 95 manual ecu's?

01-19-2012, 06:31 PM	#29
owned by pandas Zilvia Junkie Join Date: Dec 2009 Location: Atlanta GA Age: 36 Posts: 421 Trader Rating: (14) Feedback Score: 14 reviews	I believe I do actually, I can check tomorrow.

01-19-2012, 10:28 PM	#30
charles13 Zilvia Addict Join Date: Feb 2010 Location: Yuma/Mesa Posts: 627 Trader Rating: (14) Feedback Score: 14 reviews	Anything wrong with the gt45?