CA brand new in box pbm knuckles for s14 Fit 89-98 240sx - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

iLagX · 03-02-2015, 06:01 PM

PBM Forged " Super Angle Knuckle S-Chassis s13 s14 Nissan 240sx 89-98

BRAND NEW PBM NEVER INSTALLED

i paid a little over $465 for this and never got the chance to install it because my car is total.

$420 takes it!! no tax or anything

i can ship at your expense

~ Forged steel with CNC finished mounting surfaces
~ Gold Zinc Plated
~ 45mm roll center correction
~ quick steering ratio
~ No bump steer when combined with an OEM type outer tie rod
~ up to 70 degrees of angle depending on wheel width, offset, sway bar and FLCA/tenrod types
~ 8.5 - 0 degree ackerman adjustable when combined with Eccentric rack bushings & or offset tie rod adapters & or modded steering rack position
~ This is a brand new part ready to bolt on with no core charge, no modification to your OEM knuckle, no two way shipping fees, no down time
do NOT contact me with unsolicited services or offers

Your240sucks · 03-02-2015, 06:07 PM

Why not return them to Pbm ?

iLagX · 03-04-2015, 12:23 PM

cost of shipping or driving there not worth it.

sharpe_corners · 03-06-2015, 10:33 PM

They are 400 on the website, does your price include shipping?

iLagX · 03-09-2015, 11:58 AM

if you guys read
PBM has them for $400 plus tax/shipping.

az_240 · 03-09-2015, 03:40 PM

Are they for s13 or s14 ball joints?

iLagX · 03-09-2015, 05:49 PM

s14

you can run it on a s13 especially good if you are planning to do a 5 lug conversion using OEM hub.

you dont need to buy the spindle nomore.

03-04-2015, 12:23 PM	#3
iLagX Post Whore! Join Date: Dec 2008 Location: 626/714 Posts: 2,940 Trader Rating: (40) Feedback Score: 40 reviews	cost of shipping or driving there not worth it. __________________ PARTING OUT S13/S14 NEED PARTS PM ME!

03-09-2015, 11:58 AM	#5
iLagX Post Whore! Join Date: Dec 2008 Location: 626/714 Posts: 2,940 Trader Rating: (40) Feedback Score: 40 reviews	if you guys read PBM has them for $400 plus tax/shipping. __________________ PARTING OUT S13/S14 NEED PARTS PM ME! Last edited by iLagX; 03-26-2015 at 04:36 PM..

03-09-2015, 05:49 PM	#7
iLagX Post Whore! Join Date: Dec 2008 Location: 626/714 Posts: 2,940 Trader Rating: (40) Feedback Score: 40 reviews	s14 you can run it on a s13 especially good if you are planning to do a 5 lug conversion using OEM hub. you dont need to buy the spindle nomore. __________________ PARTING OUT S13/S14 NEED PARTS PM ME!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-02-2015, 06:07 PM	#2
Your240sucks Nissanaholic! Join Date: May 2013 Location: Los Angeles, CA Posts: 2,081 Trader Rating: (20) Feedback Score: 20 reviews	Why not return them to Pbm ?

03-09-2015, 03:40 PM	#6
az_240 Post Whore! Join Date: Jan 2006 Location: Phx Posts: 3,097 Trader Rating: (41) Feedback Score: 41 reviews	Are they for s13 or s14 ball joints?