My Little Silvia (S15 with RB26) - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

CursedGTR · 08-24-2007, 04:52 PM

So I figured I would post up about my project as I promised in my intro thread (for those of you who read that stuff). I have been workign on this for a couple of years now, since I spend alot of time away from home it gets difficult to dedicate time to it with the wife and kid as well. However, When I am at home I tend to get a good 20 hours a week in on it.

The plans for the car are to go as fast as possible for as long as possible.

The Engine is close to complete with everything but peripheral modifications such as radiator and the various tanks and lines I have to fabricate.

So Satarting from the beginning.

The Engine Consists of the following
RB26DETT N1 Block
HKS 87mm Pistons
JUN Rods
JUN Billet Crank
Nismo Oil Pump
N1 Water Pump
Tomei Pan Baffles
Modified RB26 Oil Pan
JUN Rod Bolts
JUN Head Studs
HKS Metal Gasket Kit
1mm Oversize Intake Valves
Apexi V-Max Valve Springs and Retainers
Apeci V-Max Lifters
Apexi V-Max Cam Shafts (270/11.4)
HKS Cam Gears
HKS Timing Belt
Port and Polish
Valve Seat Cut and Grind
Squish Area Removal
GT HEad Cooling Mod (Will illustrate in pictures)
Sard 1,000cc Injectors
HKS Fuel Rail
Top Secret Intake Manifold with 100mm Throttle
HKS GT3040 Twin BB Turbine Kit (Good to about 1100PS)
Greddy Pulley Kit
ATI Crank Damper Pulley
GReddy 5 Core Intercooler

Engine Pics:

Oil Pan after being chopped then polished (Speed Factory Okinawa Chopped it, Yours Truly Polished it).

Modified Stock Thottles To Allow for Single Throttle Conversion.

GT HEad Cooling Modification (It took me three Manifolds to get this right but it finall turned out.

Cylinder Head After Squish removal

Engine Finally Assembled (You guys do not need to see all of the Boring Pics do you?)

I will post Chasis Pics in he next Post.

DOOK · 08-24-2007, 05:01 PM

come on then you cock tease.

TonKpilS14 · 08-24-2007, 05:05 PM

aww u lucky bastard... i wish i could have a rb26dett. nice custom paint

grnappletree14 · 08-24-2007, 05:06 PM

thats shit is so sweet. keep up the good work

CursedGTR · 08-24-2007, 05:09 PM

Chasis After the first two days of stripping and STRIPPING

Because the humidity in okinawa you have to prime it right after you strip it or you will get screwed. I used a pretty hard core gel like blue stripper that ate the paint to the metal. I also used Gasket remover in hard to get to places. The entire car was stripped inside and out.

Ugly Crap Like this area under the batter plate motivated me to glass the front part of the engine bay

The Flares are done all the way to the apex of the wheel well to allow for maximum clearance when the widebody kit goes on. If I want to pass inspection with no problems I cannot cut the quarters off so they stay and just get deeply modified (really doesn't matter as they will be under a BN Sports fiberglass body kit).

Engine Bay Work. Holes were filled in with resin then sanded and three layers of fiberglass was put in then more resin, a bit of bondo to fill in divits and more sanding, then complete.

CursedGTR · 08-24-2007, 05:16 PM

I am thinking I should leave the interior like this.

Exterior As of Right Now

5 Core Intercooler (Twin 70mm inlets, Single 100mm Outlet)

S14DriftstaiN · 08-24-2007, 05:17 PM

Oh man.....I can only imagine. thats going to be some sick ish.

Tenchuu · 08-24-2007, 05:18 PM

wow lotsa work

ms!3 · 08-24-2007, 05:25 PM

loving the rear fenders. they look pretty dope the way they are right now. looks nice man. keep it up.

JRas · 08-24-2007, 05:32 PM

looks like a good project keep it up

steve shadows · 08-24-2007, 05:37 PM

what are you plans for the car?

killing people longitudinal with g forces?

right on

JDMS1lv1a · 08-24-2007, 05:47 PM

high status project. keep it up dude

tknbkthrsdy4anfg · 08-24-2007, 05:53 PM

Looks awesome, the flames on the RB make the pants rediculously tight.

Dutchmalmiss · 08-24-2007, 05:57 PM

DAMN any thoughts on paint color? wheels?

CursedGTR · 08-24-2007, 06:10 PM

Quote:

Originally Posted by Dutchmalmiss

DAMN any thoughts on paint color? wheels?

I had my buddy that airbrushed the valve cover mix up a really nice shade of blue that I like (kind of light and in between a powder blue and a metallic/electric Blue) I intend to use it on the interior and the engine bay and trunk. The exterior will likely be a slightly darker version with a coat of Pearl as well. I should be in the paint phase in about two weeks so I will keep you all posted. All I really need to do is complete the sanding and prep the body kit. Then it is time to color my little book.

The Rims I want are outside of my budget right now because I want to spend some serious cash on Engine Management (I am thinking Motec or Electromotive) and the proper gearbox is not cheap either, So I am going to go with some AllStadt 18's (I think 12J and 11J respectiveley) that someone is holding onto for me.

Once the car is complete and has been registered again, I will Most likely go with a custom set of Rays 57S with Iridium Lips.

*fliprayzin240sx* · 08-24-2007, 06:13 PM

God damn...i still wanna know what you do on island to make that much loot. If your the Ganja man...you got some great customers...Okinawans do love those buds...

CursedGTR · 08-24-2007, 06:13 PM

Quote:

Originally Posted by steve shadows

what are you plans for the car?

killing people longitudinal with g forces?

right on

I just want to go really scary fast. The kind of fast that when you finally stop, you think to yourself "holy shit, did I just do that?"

CursedGTR · 08-24-2007, 06:15 PM

Quote:

Originally Posted by fliprayzin240sx

God damn...i still wanna know what you do on island to make that much loot. If your the Ganja man...you got some great customers...Okinawans do love those buds...

We will meet someday and you will see.

YOu buy your car from Brian Dyer?? I helped build it before he bought it.

*fliprayzin240sx* · 08-24-2007, 06:15 PM

Quote:

Originally Posted by CursedGTR

I just want to go really scary fast. The kind of fast that when you finally stop, you think to yourself "holy shit, did I just do that?"

Shiet specially on this island, there aint enough roads to go that fast. Unless you wanna go kei-car dodging on the expressway where the speed limit is 55 mph.

k's_silvia2.0 · 08-24-2007, 06:17 PM

Looks really good keep us updated.

CursedGTR · 08-24-2007, 06:20 PM

Quote:

Originally Posted by fliprayzin240sx

Shiet specially on this island, there aint enough roads to go that fast. Unless you wanna go kei-car dodging on the expressway where the speed limit is 55 mph.

58 at night and not that part in front of that place that alot of people know about.

Also, I have never really paid much attention to speed limit signs, I just kind of go and do my own thing and yet I have gone 7 years without a speeding ticket (knock on a forest)

*fliprayzin240sx* · 08-24-2007, 06:31 PM

Hmm...thats true, i just dont stay out late enough to see 58 empty enough to go balls out. But yah, how much longer so we can all nut on your car when its running at the Jusco parking lot...

CursedGTR · 08-24-2007, 06:33 PM

Quote:

Originally Posted by fliprayzin240sx

Hmm...thats true, i just dont stay out late enough to see 58 empty enough to go balls out. But yah, how much longer so we can all nut on your car when its running at the Jusco parking lot...

About 8-10 Months. I have to figure out how to shit 25K More to finish it.

arkive43 · 08-24-2007, 06:37 PM

so freakin cool wangan runs!!!! when can we expect more pics!!!!!

CursedGTR · 08-24-2007, 06:48 PM

Quote:

Originally Posted by arkive43

so freakin cool wangan runs!!!! when can we expect more pics!!!!!

About 2 more weeks at most. I am in the states right now but will be back in Japan Tuesday Night. I plan on being back to work on it by Thursday and hopefully will have some cool shit cooking by then. Sub Frame reinforcement, Paint, Motor Mounts, Custom Tranny Mount, Body Kit Prep, Templating for sheet metal and carbon fiber all have to get done in the next few weeks.

*fliprayzin240sx* · 08-24-2007, 06:54 PM

Quote:

Originally Posted by CursedGTR

About 8-10 Months. I have to figure out how to shit 25K More to finish it.

Paint your turd gold and sell them on Ebay...

But yah, Ive been looking at your car pixs at the yon and that engine is sooooo fucking clean I can eat some spam and rice on it.

CursedGTR · 08-24-2007, 06:55 PM

Quote:

Originally Posted by fliprayzin240sx

Paint your turd gold and sell them on Ebay...

But yah, Ive been looking at your car pixs at the yon and that engine is sooooo fucking clean I can eat some spam and rice on it.

mmmmmmmmm spam

SexPanda · 08-24-2007, 07:19 PM

That is one bad ass build. I really cant discribe it any better than that. And its nice to see a newer silvia on here, and not so many s13's/s14's.

Havent seen many s12's either... huh.

Keep it up, and if you have any extra parts left over, like the sr20 that was in it, I'll gladly send you my shipping info lol.

RUTH'LESSDET · 08-24-2007, 07:28 PM

this is gonna be good

los_inc · 08-24-2007, 07:36 PM

thats a motha funkin sex machine if i've seen one
-los

08-24-2007, 04:52 PM	#1
CursedGTR Zilvia Junkie Join Date: Aug 2007 Location: Birmingham, AL Posts: 423 Trader Rating: (6) Feedback Score: 6 reviews	My Little Silvia (S15 with RB26) So I figured I would post up about my project as I promised in my intro thread (for those of you who read that stuff). I have been workign on this for a couple of years now, since I spend alot of time away from home it gets difficult to dedicate time to it with the wife and kid as well. However, When I am at home I tend to get a good 20 hours a week in on it. The plans for the car are to go as fast as possible for as long as possible. The Engine is close to complete with everything but peripheral modifications such as radiator and the various tanks and lines I have to fabricate. So Satarting from the beginning. The Engine Consists of the following RB26DETT N1 Block HKS 87mm Pistons JUN Rods JUN Billet Crank Nismo Oil Pump N1 Water Pump Tomei Pan Baffles Modified RB26 Oil Pan JUN Rod Bolts JUN Head Studs HKS Metal Gasket Kit 1mm Oversize Intake Valves Apexi V-Max Valve Springs and Retainers Apeci V-Max Lifters Apexi V-Max Cam Shafts (270/11.4) HKS Cam Gears HKS Timing Belt Port and Polish Valve Seat Cut and Grind Squish Area Removal GT HEad Cooling Mod (Will illustrate in pictures) Sard 1,000cc Injectors HKS Fuel Rail Top Secret Intake Manifold with 100mm Throttle HKS GT3040 Twin BB Turbine Kit (Good to about 1100PS) Greddy Pulley Kit ATI Crank Damper Pulley GReddy 5 Core Intercooler Engine Pics: Oil Pan after being chopped then polished (Speed Factory Okinawa Chopped it, Yours Truly Polished it). Modified Stock Thottles To Allow for Single Throttle Conversion. GT HEad Cooling Modification (It took me three Manifolds to get this right but it finall turned out. Cylinder Head After Squish removal Engine Finally Assembled (You guys do not need to see all of the Boring Pics do you?) I will post Chasis Pics in he next Post.

08-24-2007, 05:01 PM	#2
DOOK Post Whore! Join Date: May 2007 Location: Land of Milk and Cookies Age: 38 Posts: 7,552 Trader Rating: (3) Feedback Score: 3 reviews	come on then you cock tease. __________________ <------ Grumpy Old Asshole MY REVIEW THREAD: Ltdnismoracer4=DOOK http://www.zilvia.net/f/showthread.p...ltdnismoracer4

08-24-2007, 05:09 PM	#5
CursedGTR Zilvia Junkie Join Date: Aug 2007 Location: Birmingham, AL Posts: 423 Trader Rating: (6) Feedback Score: 6 reviews	Chasis Pics Chasis After the first two days of stripping and STRIPPING Because the humidity in okinawa you have to prime it right after you strip it or you will get screwed. I used a pretty hard core gel like blue stripper that ate the paint to the metal. I also used Gasket remover in hard to get to places. The entire car was stripped inside and out. Ugly Crap Like this area under the batter plate motivated me to glass the front part of the engine bay The Flares are done all the way to the apex of the wheel well to allow for maximum clearance when the widebody kit goes on. If I want to pass inspection with no problems I cannot cut the quarters off so they stay and just get deeply modified (really doesn't matter as they will be under a BN Sports fiberglass body kit). Engine Bay Work. Holes were filled in with resin then sanded and three layers of fiberglass was put in then more resin, a bit of bondo to fill in divits and more sanding, then complete.

08-24-2007, 05:16 PM	#6
CursedGTR Zilvia Junkie Join Date: Aug 2007 Location: Birmingham, AL Posts: 423 Trader Rating: (6) Feedback Score: 6 reviews	Interior as of right now I am thinking I should leave the interior like this. Exterior As of Right Now 5 Core Intercooler (Twin 70mm inlets, Single 100mm Outlet)

08-24-2007, 05:37 PM	#11
steve shadows Post Whore! Join Date: Aug 2003 Location: LA and OC Posts: 8,202 Trader Rating: (5) Feedback Score: 5 reviews	what are you plans for the car? killing people longitudinal with g forces? right on __________________ Like Me on FaceBook !

08-24-2007, 05:05 PM	#3
TonKpilS14 BANNED Join Date: Aug 2006 Location: 714 SoCal Posts: 183 Trader Rating: (0) Feedback Score: 0 reviews	aww u lucky bastard... i wish i could have a rb26dett. nice custom paint

08-24-2007, 05:06 PM	#4
grnappletree14 BANNED Join Date: Aug 2006 Location: SOCAL/chino hills (909) Posts: 1,829 Trader Rating: (6) Feedback Score: 6 reviews	thats shit is so sweet. keep up the good work

08-24-2007, 05:17 PM	#7
S14DriftstaiN Leaky Injector Join Date: May 2003 Location: philly Age: 41 Posts: 85 Trader Rating: (0) Feedback Score: 0 reviews	Oh man.....I can only imagine. thats going to be some sick ish.

08-24-2007, 05:18 PM	#8
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 39 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	wow lotsa work

08-24-2007, 05:25 PM	#9
ms!3 Zilvia FREAK! Join Date: Apr 2006 Location: USA Age: 31 Posts: 1,563 Trader Rating: (7) Feedback Score: 7 reviews	loving the rear fenders. they look pretty dope the way they are right now. looks nice man. keep it up.

08-24-2007, 05:32 PM	#10
JRas Zilvia FREAK! Join Date: Jul 2007 Location: Arizona Age: 32 Posts: 1,503 Trader Rating: (2) Feedback Score: 2 reviews	looks like a good project keep it up

08-24-2007, 05:47 PM	#12
JDMS1lv1a Zilvia Member Join Date: Jan 2007 Location: Florida Posts: 248 Trader Rating: (8) Feedback Score: 8 reviews	high status project. keep it up dude __________________

08-24-2007, 05:57 PM	#14
Dutchmalmiss Post Whore! Join Date: Apr 2003 Location: Socal (323) Age: 35 Posts: 3,475 Trader Rating: (13) Feedback Score: 13 reviews	DAMN any thoughts on paint color? wheels? __________________ Pignose, biaaatch.

08-24-2007, 06:13 PM	#16
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	God damn...i still wanna know what you do on island to make that much loot. If your the Ganja man...you got some great customers...Okinawans do love those buds... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

08-24-2007, 06:17 PM	#20
k's_silvia2.0 Post Whore! Join Date: Mar 2007 Location: 909/951 Age: 35 Posts: 5,111 Trader Rating: (17) Feedback Score: 17 reviews	Looks really good keep us updated. __________________

08-24-2007, 06:31 PM	#22
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Hmm...thats true, i just dont stay out late enough to see 58 empty enough to go balls out. But yah, how much longer so we can all nut on your car when its running at the Jusco parking lot... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

08-24-2007, 06:37 PM	#24
arkive43 Zilvia Addict Join Date: Sep 2006 Location: houston Age: 38 Posts: 795 Trader Rating: (0) Feedback Score: 0 reviews	so freakin cool wangan runs!!!! when can we expect more pics!!!!!

08-24-2007, 07:19 PM	#28
SexPanda Post Whore! Join Date: Jun 2007 Location: Where ever there is free beer Posts: 3,239 Trader Rating: (0) Feedback Score: 0 reviews	That is one bad ass build. I really cant discribe it any better than that. And its nice to see a newer silvia on here, and not so many s13's/s14's. Havent seen many s12's either... huh. Keep it up, and if you have any extra parts left over, like the sr20 that was in it, I'll gladly send you my shipping info lol. __________________ BRAND NEW GReddy PRofec E-01 EBC for sale, Cheap!

08-24-2007, 07:28 PM	#29
RUTH'LESSDET Zilvia Addict Join Date: Jan 2003 Location: NYC Age: 41 Posts: 905 Trader Rating: (1) Feedback Score: 1 reviews	this is gonna be good __________________ 91 Sil80-Sold, LS2 Powered 1997 240sx-Traded, 2005 350z-Sold, Whats next?

08-24-2007, 07:36 PM	#30
los_inc Zilvia Addict Join Date: Apr 2006 Location: New Joisey Bro. Age: 37 Posts: 826 Trader Rating: (15) Feedback Score: 15 reviews	thats a motha funkin sex machine if i've seen one -los __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode