vq35 in a s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

kidbandikoot · 11-02-2008, 07:23 PM

ive seen it done a few times
but was looking for info
first the pro's and con's of doing it

would you be using the 350z tranny
with a custom drive shaft ???

any info will be most helpful

thanx

zorak · 11-02-2008, 09:25 PM

the motor is expensive.

of course you will need a custom driveshaft, mounts, etc.

just go sr and save yourself the headache.

CrazyKoukiS14 · 11-02-2008, 10:06 PM

save your moeny and dont even get an SR with the money that you spend on the SR swap you can have a kick ass built KA.

WangonwWarrior · 11-02-2008, 11:06 PM

So many of these threads now, seems like these questions are being asked every time i log on.

Ghost05 · 11-05-2008, 12:10 AM

From what I here, even if you run a stand alone/create your own harness you need to be a nissan service tech to do it, or atleast know a rediculous amont about electrical and Nissan 2nd gen. OBD2 sensors and codes. and even if you do the swap I wouldn't use the stock VQ35DE tranny it's glass it's the same tranny as the S15 SR20DET 6spd. (once u push respectable power it will shatter).

unlegendary · 11-05-2008, 12:14 AM

VQ35DE in S13 in progress.....: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub

also applies to s14, i hear the s14 is easier fitment wise iono but that thread is useful regardless lol.

blueshark123 · 11-05-2008, 08:20 AM

U did not have to make 2 threads on something that can be easily searched for....

RaceBred 17 · 11-05-2008, 02:56 PM

Just go to amerikajin and see the 14 with the vq. Custom manifold. And all kinds of other stuff.

SPiG · 11-06-2008, 01:23 AM

Quote:

and even if you do the swap I wouldn't use the stock VQ35DE tranny it's glass it's the same tranny as the S15 SR20DET 6spd. (once u push respectable power it will shatter).

The S15 uses the FS6R92A (took me a while to find that) while the Z33 uses the FS6R31A. The early Z33 transmissions did have syncro problems, but the gears themselves are quite large and strong. There is a Z in the 10s with the stock 6spd, and plenty of boosted Z33s with plenty of power that don't break the transmission.

s14freak · 12-21-2008, 10:31 AM

projectRDM · 12-21-2008, 11:20 AM

Quote:

Originally Posted by SPiG

The S15 uses the FS6R92A (took me a while to find that) while the Z33 uses the FS6R31A. The early Z33 transmissions did have syncro problems, but the gears themselves are quite large and strong. There is a Z in the 10s with the stock 6spd, and plenty of boosted Z33s with plenty of power that don't break the transmission.

Thank you. I was hoping someone would chime in and prove there are still intelligent people on this board.

P33TA · 06-14-2013, 10:19 AM

I read in a magazine recently that compared to the RB25/26, the VQ35 swap would be better for autoX or time-attack racing. thoughts? (yes, I realize this is an old thread but this is one of only two that popped up when I searched

)

11-02-2008, 07:23 PM	#1
kidbandikoot Zilvia Member Join Date: Aug 2008 Location: san bernardino, ca Age: 33 Posts: 182 Trader Rating: (5) Feedback Score: 5 reviews	vq35 in a s14 ive seen it done a few times but was looking for info first the pro's and con's of doing it would you be using the 350z tranny with a custom drive shaft ??? any info will be most helpful thanx

11-02-2008, 11:06 PM	#4
WangonwWarrior Zilvia FREAK! Join Date: Jan 2008 Location: Amerika24 alabama: Where if your not first..... your last Posts: 1,163 Trader Rating: (15) Feedback Score: 15 reviews	So many of these threads now, seems like these questions are being asked every time i log on. __________________

11-05-2008, 12:14 AM	#6
unlegendary Zilvia Addict Join Date: Apr 2007 Location: with my parents Posts: 625 Trader Rating: (1) Feedback Score: 1 reviews	VQ35DE in S13 in progress.....: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub also applies to s14, i hear the s14 is easier fitment wise iono but that thread is useful regardless lol. __________________ Full Time Student for Life Last edited by unlegendary; 11-05-2008 at 12:35 AM..

12-21-2008, 10:31 AM	#10
s14freak Leaky Injector Join Date: Sep 2008 Location: North Charleston. SC Age: 33 Posts: 119 Trader Rating: (6) Feedback Score: 6 reviews	Home

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-02-2008, 09:25 PM	#2
zorak Zilvia Member Join Date: Oct 2008 Location: South Age: 31 Posts: 287 Trader Rating: (4) Rides Gallery: zorak Feedback Score: 4 reviews	the motor is expensive. of course you will need a custom driveshaft, mounts, etc. just go sr and save yourself the headache.

11-02-2008, 10:06 PM	#3
CrazyKoukiS14 Leaky Injector Join Date: Oct 2008 Location: Chicago, Illinois Age: 32 Posts: 111 Trader Rating: (0) Feedback Score: 0 reviews	save your moeny and dont even get an SR with the money that you spend on the SR swap you can have a kick ass built KA.

11-05-2008, 12:10 AM	#5
Ghost05 Join Date: Mar 2008 Location: Sacramento Age: 32 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	From what I here, even if you run a stand alone/create your own harness you need to be a nissan service tech to do it, or atleast know a rediculous amont about electrical and Nissan 2nd gen. OBD2 sensors and codes. and even if you do the swap I wouldn't use the stock VQ35DE tranny it's glass it's the same tranny as the S15 SR20DET 6spd. (once u push respectable power it will shatter).

11-05-2008, 08:20 AM	#7
blueshark123 Post Whore! Join Date: Apr 2006 Location: North Jersey Posts: 5,481 Trader Rating: (55) Feedback Score: 55 reviews	U did not have to make 2 threads on something that can be easily searched for....

11-05-2008, 02:56 PM	#8
RaceBred 17 Zilvia Member Join Date: Oct 2008 Location: riverside CA Age: 36 Posts: 240 Trader Rating: (0) Feedback Score: 0 reviews	Just go to amerikajin and see the 14 with the vq. Custom manifold. And all kinds of other stuff.

06-14-2013, 10:19 AM	#12
P33TA Join Date: Jul 2012 Location: NorthEastern U.S. Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	I read in a magazine recently that compared to the RB25/26, the VQ35 swap would be better for autoX or time-attack racing. thoughts? (yes, I realize this is an old thread but this is one of only two that popped up when I searched )