Parts Shop MAX ~ Latest super low multilink suspension arms, rods, and chassis parts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DC Dan MAX USA · 07-02-2009, 06:09 PM

The New tension rods are here!
These come with the same 1pc. forged steel end joint like our third generation RUCA.
They have the yellow silicone dust covers and the new steel ball joint spacers as well.
Steel locking nuts for the length adjustment are in place of aluminum from the previous model
The anodized 6061 aluminum tube and end bracket are carried over to the new model.
Hardware for the LCA is included.
$200/pair

It was getting to the point where I could not add any more pictures to our main advertisers thread, and it has been requested to make a separate G3 multilink thread due to the difficulty of navagating over 100 pages/3000 posts on the other one. Right now we actually have it all in stock so what better time to take action than now???

Our third generation arms and rods are stronger than ever. MAX multilink features more clearance for lowered cars than any other brand, as well as the adjustability you need to dial in your cars maximum performance. They let you set your personal preferences on characteristics like turn in, grip, tire wear and drift initiation. All of the MAX multilink parts are equipped with premium Japanese pillowball joints that eliminate OEM rubber bushings for a precision, predictable, tactile driving experience. The quality is on par with the best the world has to offer and the unique design features make them an unbeatable value.

The MAX multilink can be complimented by using or famous MAX coilovers, Subframe Collars or Subframe Solid Risers, Super Steering Angle Knuckles, and IF tie rods for a perfectly tuned suspension setup.

RUCA $200+sh In stock now!
TOE ROD $200+sh In stock now!
TRACTION ROD $180+sh In stock now!
TENSION ROD $180+sh In stock now!
SUBFRAME COLLARS $50+sh In stock now!
SUBFRAME SOLID RISERS $100+sh In stock now!

MAX R.U.C.A. (Rear Upper Control Arm) for camber adjustment on Super low S chassis cars
~100% TIG welded
~3mm/.120 wall thick DOM tube
~Single consistant bend keeps stress evenly distributed
~NMB Japan spherical bearings with dust covers
~50mm 1 piece forged rod end
~Powdercoat orange paint and Gold chrome finish on adjuster and rod end
~Angle union between adjuster tube and arm helps clear the chassis on lowered cars
~Upswept arm helps clear Axle boot on lowered cars
~Arm length maintains around -1 degree of camber on lowered cars with minimum adjuster thread exposure
~Compatible with any coilover brand
*If your car currently has no adjustable multilink you must install RUCA and TOE together to adjust your rear alignment properly because in the S chassis when you change the camber it effects the toe setting.

MAX Toe Rod
~Double TIG welded fork bracket
~31mm 6061 CNC amuminum adjuster tube is located far away from the subframe bracket for ease of adjustment
~23mm solid steel bend clears the subframe on extremely low cars
~NMB Japan spherical bearings
~40mm TIG welded rod end
~Orange and gold aluminum hard anodizing and Gold chrome steel finish
*If your car currently has no adjustable multilink you must install RUCA and TOE together to adjust your rear alignment properly because in the S chassis when you change the camber it effects the toe setting.

MAX Traction Rod
~Double TIG welded fork bracket
~31mm 6061 CNC amuminum adjuster tube
~23mm solid steel bend clears the subframe on extremely low cars
~NMB Japan spherical bearings
~40mm TIG welded rod end for S13
~44mm 1 piece billet aluminum rod end for S14
~Orange and gold aluminum hard anodizing and Gold chrome steel finish
~Increase traction by shortening this rod 1cm from stock length on higher cars or lengthen this rod for super low cars for correct geometry.
*OK to install independant from any other suspension part.
*27mm short and skinny wrench is recomended for ease of installation in cramped rod end/subframe area. We sell a custom wrench for $5.

MAX Tension rod
~100% 6061 CNC aluminum construction
~NMB Japan spherical bearings
~44mm one piece billet aluminum rod end
~Plenty of adjustment length to safely set virtually any desired caster
~Orange and gold aluminum hard anodized finish
~Comes with new hardware for Lower control arm connection
*OK to install independant from any other suspension part.
*More caster creates a self steer feeling while drifing and less caster is good for cars equipped with our super angle steering knuckles.

Subframe Collars
~CNC 6061 Aluminum
~Stiffens OEM bushing to eliminate wheel hop after clutch kick
~C shaped upper collars for easy installation
~Gold hard annodized finish
*Can be installed independant of any other parts

Subframe Solid Riser
~Completely replaces OEM Subframe Bushing
~Raises Subframe a half inch for lowered suspension geometry correction
~Makes more clearance to raise exhaust
~Slip fit, epoxy-it-in installation (no press needed)
~CNC 6061 Aluminum
~Gold hard annodized finish
*Made specifically for low ride height vehicles to help fix roll center problem.
*Please see our products forum for OEM bushing removal instructions
*You must bend the E-brake cable bracket to reroute cable so it does not rub the driveshaft.

Some history and the making of these parts:

Here is a video of the arm that we make in the usa, slightly outdated now that we TIG weld this part ~ but still interesting.

Adjuster, lock nut and pillowball spacer shown before finishing to reveal all steel components.

After plating and dust cover installed:

Installations

Drift heaven Magazine. April 2009 ,Pg32~39

"simple parts but super important" "They all look similar but unique in their own way"

Drifters change their nissan multilink arms for different reasons. "I don't like the stock rubber bushings", "I wanna be-able to do a proper alignment", "when I dropped my car, the stock arms didn't have enough adjustability", "I wanted it to look good". So which brand are you going to choose? These parts only consist of a shaft and a joint but each companies have their own theories about how they should be and what kind of material it should be.

"Max believes in making parts for super low drift cars. They have a sister shop in USA and their friends and customers only desire to drift in super low drift cars. So their RUCAS and toe arms have special bend and angles to clear from the frame, subframe, knuckle, and axle boots. They also chose thick aluminum body to keep the weight down inside the wheels while maintaing its strength."

Team DET · 07-02-2009, 06:26 PM

wow these look BADASS

jiggs · 07-02-2009, 07:09 PM

Beautiful, just beautiful

homermartinez1 · 07-02-2009, 07:12 PM

s13
ruca
traction &
toe

shipped to 78332

i have kazama parts right now but these look way beefier

DC Dan MAX USA · 07-02-2009, 07:32 PM

Thank you sirs

$620 shipped

NMs14.5kouki · 07-02-2009, 07:58 PM

s14 traction, tension, ruca, toe, shipped to 87144??

chaseSR86 · 07-02-2009, 08:00 PM

I run PBM toe arms and I love them high quality shit. I'd going to be buying the solid subframe spacers do! This shit is the real deal. Thumbs up for PBM products!

ms!3 · 07-02-2009, 08:07 PM

good stuff dan, does max plan on making tie rods?

*revat619* · 07-02-2009, 08:32 PM

What can i say, this stuff is the shit!!! I have all the muli-link stuff. AMAZING.

I think i need those collars.

jamg · 07-02-2009, 09:42 PM

all those new version products look very well built.

*Jonnie Fraz* · 07-02-2009, 10:43 PM

PBM stuff is awesome! I love the video of you guys building the arms! Just the fact that you went from MIG to TIG with out a crazy price increase says a ton about your company.
In case you are wondering guys even with very experienced TIG welders it takes more time to not only fit, but to TIG weld the arms.
When the time comes PBM will be on my car.

Ragnarok043 · 07-03-2009, 12:01 AM

its great to see such transparency from a company who continues to improve their products instead of cutting corners saving a few bucks. ill definitely look to PBM when im ready to order some suspension arms, i already got the fender roller.

DC Dan MAX USA · 07-03-2009, 12:25 AM

Quote:

Originally Posted by NMs14.5kouki

s14 traction, tension, ruca, toe, shipped to 87144??

$790 shipped

Quote:

Originally Posted by MS!3

good stuff dan, does max plan on making tie rods?

no - we sell Ikeya tie rods - they are the best and they are only $120+sh ~ in stock now

you can bend them in a U shape and they wont snap

Quote:

Originally Posted by Jonnie Fraz

PBM stuff is awesome! I love the video of you guys building the arms! Just the fact that you went from MIG to TIG with out a crazy price increase says a ton about your company.
In case you are wondering guys even with very experienced TIG welders it takes more time to not only fit, but to TIG weld the arms.
When the time comes PBM will be on my car.

...not to mention the price of a nice Miller TIG setup!
The prices have been kept very low for a long time now despite many materials price increases because we know how cheap drifters are. This causes us to sell out of each run very quickly which makes having parts in stock a bit rare.

adstudio3d · 07-03-2009, 08:44 AM

The Ikeya tie rods, that price doesn't include ends right? picture is throwing me off... how much for the ends? and can you use other ends or only Ikeya ends with those?

roorr0 · 07-03-2009, 09:06 AM

how much for the hydro brake lever shipped to 20164??

gijoe69 · 07-03-2009, 10:01 AM

how much for inner & outter tie rods for S14 shipped to 89117?

DC Dan MAX USA · 07-03-2009, 12:32 PM

Quote:

Originally Posted by adstudio3d

The Ikeya tie rods, that price doesn't include ends right? picture is throwing me off... how much for the ends? and can you use other ends or only Ikeya ends with those?

No, we dont sell tie rod ends. We recommend OEM S14 ends but you can use any end you want with them.

Quote:

Originally Posted by roorr0

how much for the hydro brake lever shipped to 20164??

The tenrod lever only? $113 shipped the standard hydrobrake complete is $245 shipped

Quote:

Originally Posted by gijoe69

how much for inner & outter tie rods for S14 shipped to 89117?

the inners are $133 shipped to you

gijoe69 · 07-03-2009, 01:40 PM

thanks where do i send payment?

project-D180 · 07-03-2009, 02:00 PM

how much for the coils sh to 07753

93superHICAS · 07-03-2009, 03:24 PM

how much for solid subframe bushings for s13
shipped to 77380

GSXRJJordan · 07-03-2009, 03:27 PM

Just sent you guys an email, tried calling but I guess you guys are off today

Can't wait to get one of those new swirl pots!

Joshkl · 07-04-2009, 12:24 AM

just installed all my new goodies. all i can say is WOW.

now i need some subframe risers.

rat240 · 07-04-2009, 12:37 AM

Subframe Collars shipped to 90041
i have a set on my hatch and they were easy to install and the look cool

DirtyOldMan · 07-04-2009, 04:38 AM

god
powerd by max
is the fucking sex

lflkajfj12123 · 07-04-2009, 04:54 AM

in for first page

tits

DC Dan MAX USA · 07-04-2009, 01:57 PM

Quote:

Originally Posted by gijoe69

thanks where do i send payment?

Send payment to [email protected] on www.paypal.com
Please write the item description in the "Email to recipient" notes section

Quote:

Originally Posted by project-D180

how much for the coils sh to 07753

$1078 shipped, there is a 2 month wait

Quote:

Originally Posted by 93superHICAS

how much for solid subframe bushings for s13
shipped to 77380

$115 shipped

Quote:

Originally Posted by GSXRJJordan

Just sent you guys an email, tried calling but I guess you guys are off today

Can't wait to get one of those new swirl pots!

had to start drinking already for the 4th of july

Quote:

Originally Posted by Joshkl

just installed all my new goodies. all i can say is WOW.

now i need some subframe risers.

theyre chilin on the shelf waitin for you to give them a nice home

Quote:

Originally Posted by rat240

Subframe Collars shipped to 90041
i have a set on my hatch and they were easy to install and the look cool

$60 shipped

Quote:

Originally Posted by DirtyOldMan

god
powerd by max
is the fucking sex

Quote:

Originally Posted by s0apgun

in for first page

tits

= )

PS13 DRFT · 07-04-2009, 04:58 PM

Can't wait til I hit stateside... I'll have my PBM suspension awaiting me to install. AMAZING STUFF!!! Good work guys!

ILoveMyRHS13 · 07-04-2009, 05:04 PM

Definitely some of the best stuff out there. I can't wait to get my coilovers on!

How much for S14 tie rods, S13 RUCAS and S13 tension rods minus my current $29 positive balance shipped to 17517?

redclaw05 · 07-04-2009, 06:24 PM

how much for everything s14 shipped to 75010

i am rerefering for suspension arms and subframe spacers

plz pm.

bornslippy73 · 07-05-2009, 08:33 AM

How much for Subframe Solid Risers shipped to 94545-1372?

Thanks.

07-02-2009, 06:09 PM	#1
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	Parts Shop MAX ~ Latest super low multilink suspension arms, rods, and chassis parts The New tension rods are here! These come with the same 1pc. forged steel end joint like our third generation RUCA. They have the yellow silicone dust covers and the new steel ball joint spacers as well. Steel locking nuts for the length adjustment are in place of aluminum from the previous model The anodized 6061 aluminum tube and end bracket are carried over to the new model. Hardware for the LCA is included. $200/pair It was getting to the point where I could not add any more pictures to our main advertisers thread, and it has been requested to make a separate G3 multilink thread due to the difficulty of navagating over 100 pages/3000 posts on the other one. Right now we actually have it all in stock so what better time to take action than now??? Our third generation arms and rods are stronger than ever. MAX multilink features more clearance for lowered cars than any other brand, as well as the adjustability you need to dial in your cars maximum performance. They let you set your personal preferences on characteristics like turn in, grip, tire wear and drift initiation. All of the MAX multilink parts are equipped with premium Japanese pillowball joints that eliminate OEM rubber bushings for a precision, predictable, tactile driving experience. The quality is on par with the best the world has to offer and the unique design features make them an unbeatable value. The MAX multilink can be complimented by using or famous MAX coilovers, Subframe Collars or Subframe Solid Risers, Super Steering Angle Knuckles, and IF tie rods for a perfectly tuned suspension setup. RUCA $200+sh In stock now! TOE ROD $200+sh In stock now! TRACTION ROD $180+sh In stock now! TENSION ROD $180+sh In stock now! SUBFRAME COLLARS $50+sh In stock now! SUBFRAME SOLID RISERS $100+sh In stock now! MAX R.U.C.A. (Rear Upper Control Arm) for camber adjustment on Super low S chassis cars ~100% TIG welded ~3mm/.120 wall thick DOM tube ~Single consistant bend keeps stress evenly distributed ~NMB Japan spherical bearings with dust covers ~50mm 1 piece forged rod end ~Powdercoat orange paint and Gold chrome finish on adjuster and rod end ~Angle union between adjuster tube and arm helps clear the chassis on lowered cars ~Upswept arm helps clear Axle boot on lowered cars ~Arm length maintains around -1 degree of camber on lowered cars with minimum adjuster thread exposure ~Compatible with any coilover brand If your car currently has no adjustable multilink you must install RUCA and TOE together to adjust your rear alignment properly because in the S chassis when you change the camber it effects the toe setting. MAX Toe Rod ~Double TIG welded fork bracket ~31mm 6061 CNC amuminum adjuster tube is located far away from the subframe bracket for ease of adjustment ~23mm solid steel bend clears the subframe on extremely low cars ~NMB Japan spherical bearings ~40mm TIG welded rod end ~Orange and gold aluminum hard anodizing and Gold chrome steel finish If your car currently has no adjustable multilink you must install RUCA and TOE together to adjust your rear alignment properly because in the S chassis when you change the camber it effects the toe setting. MAX Traction Rod ~Double TIG welded fork bracket ~31mm 6061 CNC amuminum adjuster tube ~23mm solid steel bend clears the subframe on extremely low cars ~NMB Japan spherical bearings ~40mm TIG welded rod end for S13 ~44mm 1 piece billet aluminum rod end for S14 ~Orange and gold aluminum hard anodizing and Gold chrome steel finish ~Increase traction by shortening this rod 1cm from stock length on higher cars or lengthen this rod for super low cars for correct geometry. OK to install independant from any other suspension part. 27mm short and skinny wrench is recomended for ease of installation in cramped rod end/subframe area. We sell a custom wrench for $5. MAX Tension rod ~100% 6061 CNC aluminum construction ~NMB Japan spherical bearings ~44mm one piece billet aluminum rod end ~Plenty of adjustment length to safely set virtually any desired caster ~Orange and gold aluminum hard anodized finish ~Comes with new hardware for Lower control arm connection OK to install independant from any other suspension part. More caster creates a self steer feeling while drifing and less caster is good for cars equipped with our super angle steering knuckles. Subframe Collars ~CNC 6061 Aluminum ~Stiffens OEM bushing to eliminate wheel hop after clutch kick ~C shaped upper collars for easy installation ~Gold hard annodized finish Can be installed independant of any other parts Subframe Solid Riser ~Completely replaces OEM Subframe Bushing ~Raises Subframe a half inch for lowered suspension geometry correction ~Makes more clearance to raise exhaust ~Slip fit, epoxy-it-in installation (no press needed) ~CNC 6061 Aluminum ~Gold hard annodized finish Made specifically for low ride height vehicles to help fix roll center problem. Please see our products forum for OEM bushing removal instructions You must bend the E-brake cable bracket to reroute cable so it does not rub the driveshaft. Some history and the making of these parts: Here is a video of the arm that we make in the usa, slightly outdated now that we TIG weld this part ~ but still interesting. Adjuster, lock nut and pillowball spacer shown before finishing to reveal all steel components. After plating and dust cover installed: Installations Drift heaven Magazine. April 2009 ,Pg32~39 "simple parts but super important" "They all look similar but unique in their own way" Drifters change their nissan multilink arms for different reasons. "I don't like the stock rubber bushings", "I wanna be-able to do a proper alignment", "when I dropped my car, the stock arms didn't have enough adjustability", "I wanted it to look good". So which brand are you going to choose? These parts only consist of a shaft and a joint but each companies have their own theories about how they should be and what kind of material it should be. "Max believes in making parts for super low drift cars. They have a sister shop in USA and their friends and customers only desire to drift in super low drift cars. So their RUCAS and toe arms have special bend and angles to clear from the frame, subframe, knuckle, and axle boots. They also chose thick aluminum body to keep the weight down inside the wheels while maintaing its strength." __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business! Last edited by DC Dan MAX USA; 11-04-2009 at 03:11 PM..

07-02-2009, 06:26 PM	#2
Team DET Zilvia Addict Join Date: May 2008 Location: San Bernardino Posts: 770 Trader Rating: (13) Feedback Score: 13 reviews	wow these look BADASS __________________ (OΞO/- -\OΞO)

07-02-2009, 07:09 PM	#3
jiggs Zilvia Junkie Join Date: Jul 2006 Location: Hawaii Posts: 379 Trader Rating: (0) Feedback Score: 0 reviews	Beautiful, just beautiful __________________ JS4HATERS

07-02-2009, 07:32 PM	#5
DC Dan MAX USA Zilvia.net Advertiser Join Date: Aug 2005 Location: San Diego Posts: 2,478 Trader Rating: (79) Feedback Score: 79 reviews	Thank you sirs $620 shipped __________________ How To order: You can order directly from our zilvia advertiser threads. When you add to cart, you get an instant shipping estimate, & the cart will remember all of your items as you move between forum threads and our website www.poweredbymax.net until you remove them or check out. I can also calculate estimates manually for you but the cart's estimates are way faster and more accurate. Order Inquiry: IM me your real name and paypal address. Thanks for your business!

07-02-2009, 08:32 PM	#9
revat619 Retired General Join Date: Jun 2002 Location: San Diego Posts: 4,672 Trader Rating: (7) Feedback Score: 7 reviews	What can i say, this stuff is the shit!!! I have all the muli-link stuff. AMAZING. I think i need those collars. __________________ www.Jspec.com www.SpeedAlliance.com www.PoweredByMax.net Instagram: @rjsladerade

07-02-2009, 07:12 PM	#4
homermartinez1 Leaky Injector Join Date: Feb 2007 Location: Killeen Age: 35 Posts: 83 Trader Rating: (3) Feedback Score: 3 reviews	s13 ruca traction & toe shipped to 78332 i have kazama parts right now but these look way beefier

07-02-2009, 07:58 PM	#6
NMs14.5kouki Zilvia Addict Join Date: Apr 2009 Location: albuquerque Age: 33 Posts: 654 Trader Rating: (38) Feedback Score: 38 reviews	s14 traction, tension, ruca, toe, shipped to 87144??

07-02-2009, 08:00 PM	#7
chaseSR86 Zilvia Member Join Date: Feb 2007 Location: Long Beach, CA Age: 37 Posts: 174 Trader Rating: (4) Feedback Score: 4 reviews	I run PBM toe arms and I love them high quality shit. I'd going to be buying the solid subframe spacers do! This shit is the real deal. Thumbs up for PBM products!

07-02-2009, 08:07 PM	#8
ms!3 Zilvia FREAK! Join Date: Apr 2006 Location: USA Age: 31 Posts: 1,563 Trader Rating: (7) Feedback Score: 7 reviews	good stuff dan, does max plan on making tie rods?

07-02-2009, 09:42 PM	#10
jamg Nissanaholic! Join Date: May 2009 Location: GA Posts: 2,106 Trader Rating: (7) Feedback Score: 7 reviews	all those new version products look very well built.

07-02-2009, 10:43 PM	#11
Jonnie Fraz Premium Member Join Date: Jan 2005 Location: Cali Age: 53 Posts: 1,371 Trader Rating: (29) Rides Gallery: Jonnie Fraz Feedback Score: 29 reviews	PBM stuff is awesome! I love the video of you guys building the arms! Just the fact that you went from MIG to TIG with out a crazy price increase says a ton about your company. In case you are wondering guys even with very experienced TIG welders it takes more time to not only fit, but to TIG weld the arms. When the time comes PBM will be on my car. __________________ Stealth-Custom-Fab.com

07-03-2009, 12:01 AM	#12
Ragnarok043 Zilvia Member Join Date: Jul 2005 Location: SF Posts: 285 Trader Rating: (1) Feedback Score: 1 reviews	its great to see such transparency from a company who continues to improve their products instead of cutting corners saving a few bucks. ill definitely look to PBM when im ready to order some suspension arms, i already got the fender roller.

07-03-2009, 08:44 AM	#14
adstudio3d Zilvia Member Join Date: Nov 2005 Location: Dirty Jerz! Posts: 162 Trader Rating: (0) Feedback Score: 0 reviews	The Ikeya tie rods, that price doesn't include ends right? picture is throwing me off... how much for the ends? and can you use other ends or only Ikeya ends with those? __________________ Marketing and event photographer www.natephoto.com XTC - Custom Paint and Body coming soon...

07-03-2009, 09:06 AM	#15
roorr0 Zilvia Junkie Join Date: Apr 2006 Location: Vee-Aye Posts: 366 Trader Rating: (9) Feedback Score: 9 reviews	how much for the hydro brake lever shipped to 20164??

07-03-2009, 10:01 AM	#16
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	how much for inner & outter tie rods for S14 shipped to 89117?

07-03-2009, 01:40 PM	#18
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	thanks where do i send payment?

07-03-2009, 02:00 PM	#19
project-D180 Zilvia Addict Join Date: Apr 2008 Location: south caroloina Posts: 987 Trader Rating: (2) Feedback Score: 2 reviews	how much for the coils sh to 07753

07-03-2009, 03:24 PM	#20
93superHICAS Zilvia Member Join Date: May 2006 Location: houston texas Posts: 223 Trader Rating: (0) Feedback Score: 0 reviews	how much for solid subframe bushings for s13 shipped to 77380 __________________ when life gets hard, i pick up the card with the smiley face

07-03-2009, 03:27 PM	#21
GSXRJJordan Post Whore! Join Date: May 2006 Location: << 626 >> Posts: 9,135 Trader Rating: (19) Rides Gallery: GSXRJJordan Feedback Score: 19 reviews	Just sent you guys an email, tried calling but I guess you guys are off today Can't wait to get one of those new swirl pots! __________________ Jordan Innovations has a new web site! www.JordanInnovations.com -- All your favorite FD Pro Drifters love it, trust me -- www.JordanInnovations.com

07-04-2009, 12:37 AM	#23
rat240 Post Whore! Join Date: Nov 2007 Location: zipcode Posts: 3,294 Trader Rating: (87) Feedback Score: 87 reviews	Subframe Collars shipped to 90041 i have a set on my hatch and they were easy to install and the look cool

07-04-2009, 04:38 AM	#24
DirtyOldMan Zilvia Member Join Date: Nov 2008 Location: NORCAL - SAC NOT Bayarea NOT So Cal NOT Anywhere Else! JUST SACRAMENTO Age: 32 Posts: 275 Trader Rating: (0) Feedback Score: 0 reviews	god powerd by max is the fucking sex __________________ My WHITE WHEELS are 15x11 -46 STOP ASKING!

07-04-2009, 04:54 AM	#25
lflkajfj12123 Join Date: Apr 2007 Location: 　　　　　　　　 Posts: 8,480 Trader Rating: (20) Feedback Score: 20 reviews	in for first page tits

07-04-2009, 04:58 PM	#27
PS13 DRFT Zilvia Junkie Join Date: Jun 2009 Location: SGV California Age: 34 Posts: 370 Trader Rating: (18) Feedback Score: 18 reviews	Can't wait til I hit stateside... I'll have my PBM suspension awaiting me to install. AMAZING STUFF!!! Good work guys!

07-04-2009, 06:24 PM	#29
redclaw05 Zilvia Member Join Date: Aug 2006 Location: Dallas, TX Age: 35 Posts: 180 Trader Rating: (0) Feedback Score: 0 reviews	how much for everything s14 shipped to 75010 i am rerefering for suspension arms and subframe spacers plz pm. __________________ 1995 S14 NonSunroof.

07-05-2009, 08:33 AM	#30
bornslippy73 Zilvia FREAK! Join Date: Dec 2007 Location: SF/Bay Area California Posts: 1,009 Trader Rating: (45) Feedback Score: 45 reviews	How much for Subframe Solid Risers shipped to 94545-1372? Thanks. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode