empir3e

Ive been going all through these forums and have only seen a few posts about people doing reviews about some of the ISIS stuff from Enjuku Racing. Im starting a s13 build and have a laundry list of parts, so far a majority of them being ISIS because Ive worked a good deal with Enjuku. Before i buy this stuff, are these parts known to be pretty relieable? or will I just end up kinda wasting my money as im on my way to a low level drifting build??

Sileighty_85

you should search around, there are s few threads out there,

I even made one for the control arms

__________________
後輪駆動車１番
1989 Built SR GT2871R -363whp
1998 S14 W/RB25- 250ish (For Now)
1986 SR86 - 200ish
1990 R32 GTR - 320hp
Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html
Don't Buy XS-Power or SSAC Shit

empir3e

finding the posts about the reviews are what im looking for.... i can find those no problem. i dunno if i just worded what i was asking wrong or what, but im just trying to find out if ISIS stuff is reliable as a whole, ya know. because ive never owned a jdm car before this week when i got my 240. so ive never heard of these guys before now...

drift213

first jdm build??(IMO) take your time and get the good parts PBM,TEIN, etc... and it will pay off at the end

__________________
LOTS OF SR20,ka24de,s13 goodies for sale check my threds

empir3e

i totally agree with you on that man.... the rest of the parts on the list are HKS, Nismo, Fidanza, Walbro and some others, but some of the smaller stuff was the ISIS parts, again because ive got a great deal worked out with Enjuku right now. im trying to make sure i do this one as right as i can lol since it is my first JDM build.... i wanna make sure i have stuff that im not gonna have to replace after my first time dumping the clutch and breaking the rear end loose lol

stinky_180

your doing it wrong with isis if thats the case..

however, i have the isis v2 short shifter and its been working perfectly fine. the bushing that came with the shifter didn't fit the transmission, bought a brand new and it fit perfectly fine. a little too 'stiff' to my liking but it works well and does not rattle. i will be switching back to stock shifter very soon though. good luck

__________________
SoCal RallyX Coverage and MTB Ride Reports
WheelsDirty

240_SeXy

i got al the isis rear links you know the suspension package they have, so far they been good to me over a year know n no problems with them no rust no nuthing just dirty

PITCH

I'de go w/ SPL Parts.

__________________

driftn_silvia

not alot of plp can afford that but,

i second that!

empir3e

im workin off of a rather decent budget... i got 6 grand right now, and will have about another 2500 right after i get back from iraq next year... im not gonna count any money i manage to save inbetween now and than cause i dont think the wife would approve of that lol... but when i say i made a decent size list of parts, what i really mean to say is that i made a pretty long ass list of shit to buy and send to my house for when i get home

modulation

I've had the ISIS short shifter since like Feb.. Pretty happy with it, no problems.

I've had the ISIS adjustable RUCA since August or so, no problems.
The welds aren't the best on them, but I don't think they will crack or anything.

empir3e

sweet shit man, thanks for the help.... the V2 short shifter was one of the things on my stupidly long list of parts....appreciate the input

benarovi

dude search theres many good 20 page arguments about isis parts. your just gonna start one of those arguments again. but if ur on a small budget, isis is way to go

empir3e

haha, im not trying to search for somebody elses pissing contest on whose "parts" are bigger or better or whatever the hell these people fight about...if people wanna start arguments on an internet forum, well than fuck em lol........ im not on a "small" budget but im not exactly going off of a family members life long savings either ya know lol...

yingiang

isis is great budget parts
you do get what you pay for..but imo they are not going to put your life in jeopardy

benarovi

well his lifes already in jeopardy when you drive a s13 ahaha

empir3e

haha lol u dick

joe645733

hey i've had a 350z, twin turbo z, and now going to a very nice s13 hatch. all cars were paid in full so it's not like i was going down-hill financially. the s13 hatch is a nice looking car!

__________________
E85 1j SC300

onefst240

Well i have a few isis parts installed on my sr swapped s13. I have the radiator,fans,radiator hoses,intake and fmic. Everything installed pretty easy except the fmic piping. Either the pipes were little too short or the bends a little too sharp, so i had to buy a 12" piece of coupler just for 4" so i could mate the pipes together. But other then that everything works quite well. Its been 6 months so it wasnt too long ago that i installed everything. Hope that helps.

sidewaysil80

i'm rocking the radiator/fans, exhaust manifold, o2 pipe, and straight pipe exhaust...NO issues here. i had their suspension pieces on my old car and they were pretty solid. welds weren't the greatest but def not deal breaking. not too mention ken @ enjuku has by far the best customer service in the industry as far as im concerned. if your on a budget you CAN'T beat isis...their is literally no alternative thats better. UNLESS you have the money or really care about what people think...then obviously get spl or something (as far as suspension pieces).

howyfeltersnatch

this

i recently bought a shit ton of isis parts.. a full turbo kit, rocker arm stoppers, v2 short shifter, intake manifold. i was pretty happy about everything.. im still in the install part of my build. but the best advice i can give you is all their R&D goes into the product not really the bolts and etc. so use new bolts and studs if you need them. they sent the wrong intake twice, shipped me the correct one and i got to keep the other two.. cant beat that.

you can check my build thread to get a look at most of the isis parts if your curious



hard to say no to that

__________________

Z33dori

i have ISIS rear stuff, i hit alot of bumps and pot holes..... shit is still holding up

__________________

yingiang

HAHAHAHAHHAHA
i know of some hardcore drifters that use top speed arms with knuckles and whatnot.
still holding up

fakieSI

got the ISIS control arm package and its great... jus keep the hyme joints oiled... plus ken at enjuku stands behind it...

satek

I own the whole suspension arm set, I currently only have the tension rods installed and they have been solid for 4 months now...I recently installed an isis se mb exhaust. The welds were nice and fitment was good. I will be buying more isis parts in the future...and if anything happens I'm pretty sure enjuku has you covered

jack025

check out amsperformace.com

slowerthanyou

I have a isis powersteering hose and isis front mount.. everything fitted up fine and no leaks on the powersteering hose..

btw I just got back from mosul in october lol

empir3e

haha no fucking way dude!! i relieved you guys, 2/3 right? im tasked out right now with one of your guys other units at patrol base 15 with 6/8. wow man what a small world lol

waxball88

I have the ISIS suspension package. Been a little over a month now, still going strong, look good, easy and solid adjustment. Thumbs up.

reed1285

i have the isis v2 short shifter...im pretty happy with it...the only complaint i had was the weight on the shifter shaft would vibrate on the shaft pretty hard...it was annoying as hell but didnt hurt anything i dont guess. anyways it was an easy fix..nothing a little electrical tape cant fix lol. fitment was good too