S14 LCA Questions - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

skylindrftr · 07-12-2009, 04:41 AM

I was considering putting S14 LCA's on my S13 since the tires hit the coilover on sharp turns. Will this help this problem? From what I can gather it pushes the wheel out another 10mm, which should help the problem.

Also, a couple other questions:

1. Will the stock s13 SE stabilizer bolt right up?

2. How much is the camber effected, if at all?

3. I got Attain 5 lug conversion for my s13 front spindle, I'm guessing these wont fit the new s14 upright?

Thanks

projectRDM · 07-12-2009, 09:38 AM

It pushes it out 10mm, basically giving more negative camber, but it doesn't change the angle the spindle bolts to the coilover, so it won't help your clearance issues.

Bolts right in otherwise, use your S13 spindle unless you have S14 hubs.

japslapsilvia · 07-12-2009, 10:16 AM

just remember to use the correct ball joint for what ever spindle that your using.

skylindrftr · 07-12-2009, 03:57 PM

Thanks for the good info. RDM, I have seen people running this on their s14's and they are somehow tucking 17x10's with the same offset as mine, I guess it's just the shape of the coilover I have?

*swayray* · 07-12-2009, 04:24 PM

you may have to press and s13 ball joint on that s14 lca if you are going to keep your s13 knuckle spindle.

skylindrftr · 07-12-2009, 10:34 PM

Cool thanks swayray.

07-12-2009, 04:41 AM	#1
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 32 Posts: 1,097 Trader Rating: (26) Feedback Score: 26 reviews	S14 LCA Questions I was considering putting S14 LCA's on my S13 since the tires hit the coilover on sharp turns. Will this help this problem? From what I can gather it pushes the wheel out another 10mm, which should help the problem. Also, a couple other questions: 1. Will the stock s13 SE stabilizer bolt right up? 2. How much is the camber effected, if at all? 3. I got Attain 5 lug conversion for my s13 front spindle, I'm guessing these wont fit the new s14 upright? Thanks

07-12-2009, 09:38 AM	#2
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	It pushes it out 10mm, basically giving more negative camber, but it doesn't change the angle the spindle bolts to the coilover, so it won't help your clearance issues. Bolts right in otherwise, use your S13 spindle unless you have S14 hubs. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com Last edited by projectRDM; 07-13-2009 at 12:23 PM..

07-12-2009, 04:24 PM	#5
swayray Premium Member Join Date: Aug 2005 Location: torrance Posts: 1,017 Trader Rating: (23) Rides Gallery: swayray Feedback Score: 23 reviews	you may have to press and s13 ball joint on that s14 lca if you are going to keep your s13 knuckle spindle. __________________ http://www.thenismoshop.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-12-2009, 03:57 PM	#4
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 32 Posts: 1,097 Trader Rating: (26) Feedback Score: 26 reviews	Thanks for the good info. RDM, I have seen people running this on their s14's and they are somehow tucking 17x10's with the same offset as mine, I guess it's just the shape of the coilover I have?

07-12-2009, 10:34 PM	#6
skylindrftr Zilvia FREAK! Join Date: Apr 2007 Location: Metro Detroit Age: 32 Posts: 1,097 Trader Rating: (26) Feedback Score: 26 reviews	Cool thanks swayray.