Ka plug identification please help! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

civicej8 · 01-05-2017, 10:52 PM

Guys I'm swapping back in a ka into my car and when I had the SR it had a white plug (f4 I believe??) Plugged in. The used ka harness doesn't have this white plug. Is perhaps my ka harness just screwed up? Thanks for the help guys

civicej8 · 01-05-2017, 10:53 PM

The location of this plug is located on the passenger side footwell where the stock ECU would go. I'm assuming it trails to the back of the car where the tails and fuel pump wiring would be

Sent from my Nexus 6P using Tapatalk

civicej8 · 01-09-2017, 08:48 PM

Bump

Sent from my Nexus 6P using Tapatalk

*dbeiler* · 01-10-2017, 06:54 PM

Your photo does not show any KA engine harness present at all. Have you routed it in through the firewall? Your photo shows the M63 chassis plug (which the large, white F3 plug will connect to) and two other chassis plugs. Your F3 plug may have gotten stuck behind the HVAC unit as you fed the wire harness in through the firewall.

civicej8 · 01-10-2017, 11:21 PM

Quote:

Originally Posted by dbeiler

Your photo does not show any KA engine harness present at all. Have you routed it in through the firewall? Your photo shows the M63 chassis plug (which the large, white F3 plug will connect to) and two other chassis plugs. Your F3 plug may have gotten stuck behind the HVAC unit as you fed the wire harness in through the firewall.

Yes. I'm showing the chassis side. But the ka harness I have does not have the f3 plug. That's what I'm trying to figure out. Do I need the f3 plug on the ka harness ? Thanks if that makes sense. And I have not routed it through the firewall as I want to make sure that I do indeed need that white f3 plug your referring too.

Sent from my Nexus 6P using Tapatalk

01-05-2017, 10:52 PM	#1
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 35 Posts: 525 Trader Rating: (8) Feedback Score: 8 reviews	Ka plug identification please help! Guys I'm swapping back in a ka into my car and when I had the SR it had a white plug (f4 I believe??) Plugged in. The used ka harness doesn't have this white plug. Is perhaps my ka harness just screwed up? Thanks for the help guys

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-05-2017, 10:53 PM	#2
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 35 Posts: 525 Trader Rating: (8) Feedback Score: 8 reviews	The location of this plug is located on the passenger side footwell where the stock ECU would go. I'm assuming it trails to the back of the car where the tails and fuel pump wiring would be Sent from my Nexus 6P using Tapatalk

01-09-2017, 08:48 PM	#3
civicej8 Zilvia Junkie Join Date: Apr 2007 Location: las vegas Age: 35 Posts: 525 Trader Rating: (8) Feedback Score: 8 reviews	Bump Sent from my Nexus 6P using Tapatalk

01-10-2017, 06:54 PM	#4
dbeiler Premium Member Join Date: Jun 2012 Location: Lancaster county, PA Age: 30 Posts: 465 Trader Rating: (4) Feedback Score: 4 reviews	Your photo does not show any KA engine harness present at all. Have you routed it in through the firewall? Your photo shows the M63 chassis plug (which the large, white F3 plug will connect to) and two other chassis plugs. Your F3 plug may have gotten stuck behind the HVAC unit as you fed the wire harness in through the firewall.