Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 09-02-2011, 01:28 PM   #61
dudewutup
Zilvia Member
 
dudewutup's Avatar
 
Join Date: Mar 2011
Location: mcbee, sc
Age: 31
Posts: 154
Trader Rating: (0)
dudewutup is an unknown quantity at this point
Feedback Score: 0 reviews
Any updates? I got mine started this week.
__________________

Guess I can't call it a 240....
dudewutup is offline   Reply With Quote
Sponsored Links
Old 12-11-2011, 11:33 AM   #62
40flash
Leaky Injector
 
Join Date: Oct 2009
Location: Arizona
Age: 69
Posts: 56
Trader Rating: (0)
40flash is an unknown quantity at this point
Feedback Score: 0 reviews
Everyone who does one of these engine swaps ends up with spare parts. I have a friend that bought an engine and trans out of a 06 Z. The aluminum shift bracket was broken and he is looking for a stock one. He is putting the engine in a g35 so he needs the stock bracket. Since none of us can use this piece in our s13 & s14 conversions I thought I would see if anyone would like to sell their left over shift bracket that bolts onto the trans housing. Not the shift mechanism but just the bracket?
40flash is offline   Reply With Quote
Old 12-11-2011, 06:37 PM   #63
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Quote:
Originally Posted by 40flash View Post
Everyone who does one of these engine swaps ends up with spare parts. I have a friend that bought an engine and trans out of a 06 Z. The aluminum shift bracket was broken and he is looking for a stock one. He is putting the engine in a g35 so he needs the stock bracket. Since none of us can use this piece in our s13 & s14 conversions I thought I would see if anyone would like to sell their left over shift bracket that bolts onto the trans housing. Not the shift mechanism but just the bracket?
how much ur willing to pay? im not using my bracket its from a 05 g35 trans im sure its the same
sexcii-zenki is offline   Reply With Quote
Old 12-12-2011, 10:29 PM   #64
40flash
Leaky Injector
 
Join Date: Oct 2009
Location: Arizona
Age: 69
Posts: 56
Trader Rating: (0)
40flash is an unknown quantity at this point
Feedback Score: 0 reviews
I sent you a PM with my friends offer.
40flash is offline   Reply With Quote
Old 12-13-2011, 09:30 AM   #65
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Update:

so the car is done and i have been driving it. we ran into all sorts of problems. the fuel rail adaptor from z-fever leaked fuel so we had to re-weld the flanges. the air intake they made me would have dumped the filter right into the fender and p/s rez. my Y-pipe that they made me did not bolt up to the headers that they also made, and it was too long to bolt onto the cat. i had to take all these problems to a local shop so they could basically rebuild all these parts. Z-fever also made an adapter to allow my speedo and stock tach to work, and it kinda does. every once and a while the tack will drop to 0 then bounce back up to the engine run speed. the speedo is a nightmare. the first day, it was off about 20 mph, and the past two days, the speedo hasnt worked at all.

other than all that i am having a blast driving it! I still need to reassemble my dashboard and put my hood back on lol but she is sure drivable!
dorrifto is offline   Reply With Quote
Old 12-13-2011, 10:36 AM   #66
cassa_bx
Leaky Injector
 
cassa_bx's Avatar
 
Join Date: Jan 2009
Location: jersey
Age: 46
Posts: 55
Trader Rating: (0)
cassa_bx is an unknown quantity at this point
Feedback Score: 0 reviews
Congrats to all rockin a vq'd 240. Makes me miss mine.....a little.
cassa_bx is offline   Reply With Quote
Old 12-13-2011, 10:41 PM   #67
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
unless i missed it but any final pix? vids?
sexcii-zenki is offline   Reply With Quote
Old 12-17-2011, 03:32 AM   #68
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by sexcii-zenki View Post
unless i missed it but any final pix? vids?
i will get some up soon. been busy with finals the past week but now that those are over with i have more time to spend with my baby!
dorrifto is offline   Reply With Quote
Old 12-17-2011, 10:34 AM   #69
upsdude
Post Whore!
 
upsdude's Avatar
 
Join Date: Apr 2009
Location: Fontana (the good part)
Posts: 2,721
Trader Rating: (46)
upsdude is an unknown quantity at this point
Feedback Score: 46 reviews
Quote:
Originally Posted by dorrifto View Post
Update:

so the car is done and i have been driving it. we ran into all sorts of problems. the fuel rail adaptor from z-fever leaked fuel so we had to re-weld the flanges. the air intake they made me would have dumped the filter right into the fender and p/s rez. my Y-pipe that they made me did not bolt up to the headers that they also made, and it was too long to bolt onto the cat. i had to take all these problems to a local shop so they could basically rebuild all these parts. Z-fever also made an adapter to allow my speedo and stock tach to work, and it kinda does. every once and a while the tack will drop to 0 then bounce back up to the engine run speed. the speedo is a nightmare. the first day, it was off about 20 mph, and the past two days, the speedo hasnt worked at all.

other than all that i am having a blast driving it! I still need to reassemble my dashboard and put my hood back on lol but she is sure drivable!
damn doesn't sound like z-fever know what the hell they're doing lol
upsdude is offline   Reply With Quote
Old 01-03-2012, 10:04 PM   #70
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
wired in my own temp sensor. took the position of the stock one.


some soldering. I didnt want 12 miles of wires going to something that gives the same signal that these locations gave.


It works! didnt have the sensor wired yet, but it is now. It works perfect too.


Got the plenum powder coated.


The lighting sucks in this vid, but im tired and not shooting another one tonight. maybe later this week.
http://youtu.be/IMf0zj8_NKk

Last edited by dorrifto; 01-03-2012 at 10:12 PM.. Reason: fixed link
dorrifto is offline   Reply With Quote
Old 01-03-2012, 10:15 PM   #71
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
god i am looking at my engine bay pic.... Its a wiring nightmare on the left. I should clean that up some huh.

Oh and i will get a pic with the intake on too.

vid of engine running:
http://youtu.be/IMf0zj8_NKk
dorrifto is offline   Reply With Quote
Old 01-04-2012, 08:05 AM   #72
dudewutup
Zilvia Member
 
dudewutup's Avatar
 
Join Date: Mar 2011
Location: mcbee, sc
Age: 31
Posts: 154
Trader Rating: (0)
dudewutup is an unknown quantity at this point
Feedback Score: 0 reviews
Looking really good! Get us some driving action. I wish I could get the time to finish mine.

sent from my cell phone. its a old beat up one held together with rubber bands. im ghetto...
__________________

Guess I can't call it a 240....
dudewutup is offline   Reply With Quote
Old 01-04-2012, 03:53 PM   #73
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by dudewutup View Post
Looking really good! Get us some driving action. I wish I could get the time to finish mine.

sent from my cell phone. its a old beat up one held together with rubber bands. im ghetto...
What do you have left on yours?
dorrifto is offline   Reply With Quote
Old 01-13-2012, 01:08 PM   #74
tapdeznutz
Nissanaholic!
 
tapdeznutz's Avatar
 
Join Date: May 2011
Location: Long Beach
Age: 41
Posts: 1,801
Trader Rating: (50)
tapdeznutz is an unknown quantity at this point
Feedback Score: 50 reviews
how was the wiring aspect of the swap??? also any problems to report on that throttle body being right up against the firewall? looks like you had to bash it in a bit...
tapdeznutz is offline   Reply With Quote
Old 01-16-2012, 12:14 AM   #75
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by tapdeznutz View Post
how was the wiring aspect of the swap??? also any problems to report on that throttle body being right up against the firewall? looks like you had to bash it in a bit...
i had z fever do most of the wiring, but there was a little bit that i had to do when i got the harness back . it wasnt hard. but yeah i had to bash in the firewall a bit... apparently i am the only one who has had to do that so far. mckinney says that every chassis is varies one way or another by up to 1/2 inch. my 1/2 inch was rather inconvenient. the hood also didnt clear. I got some 1 inch spacers and longer screws for the back of my hood where it bolts to the latch and its fine now. I saw that some s-chassis guys put some spacers there for heat to better escape the engine bay, so i essentially did the same by a lot larger gap lol
dorrifto is offline   Reply With Quote
Old 01-16-2012, 10:38 AM   #76
tapdeznutz
Nissanaholic!
 
tapdeznutz's Avatar
 
Join Date: May 2011
Location: Long Beach
Age: 41
Posts: 1,801
Trader Rating: (50)
tapdeznutz is an unknown quantity at this point
Feedback Score: 50 reviews
very nice im starting to looking into/researching vq35de and the ls1 swaps. but for now im just piecing together a turbo kit for the hell of it.
tapdeznutz is offline   Reply With Quote
Old 02-04-2012, 12:58 AM   #77
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
So I fell victim to the revups oil consumption. pulled the motor out. doing FULL build. 96mm sleeves, weisco pistons (11:1 comp ratio), eagle h beam rods. taking the rotating assembly to the machine shop tomorrow morning to get balanced. heads have a 5 angle valve job now, both block and heads machined for a half inch studs. afterwards, it will be all set to go for a 150 shot of juice, and maybe a supercharger in the future
dorrifto is offline   Reply With Quote
Old 02-04-2012, 04:05 PM   #78
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Quote:
Originally Posted by dorrifto View Post
So I fell victim to the revups oil consumption. pulled the motor out. doing FULL build. 96mm sleeves, weisco pistons (11:1 comp ratio), eagle h beam rods. taking the rotating assembly to the machine shop tomorrow morning to get balanced. heads have a 5 angle valve job now, both block and heads machined for a half inch studs. afterwards, it will be all set to go for a 150 shot of juice, and maybe a supercharger in the future
damn dude that sux major ass...u only had it running 4a month b4 it gave on u, i see u liked the blue i used im taking ur idea on the temp guage...a few questions: with the fire wall what hits the plenum or the throttle body? did u get any vids of the car while u were driving it? did the headers clear the steering rack? can u post up a few more pix of the engine in the bay b4 u ripp it out wana see how the compressor sits since everi1 elses swaps I've seen eliminate it...thanx! good luck on the engine rebuild

also, 4got to add if u decide on not finishing the build, ill buy ur harness so count me 1st...lol!
sexcii-zenki is offline   Reply With Quote
Old 02-04-2012, 11:47 PM   #79
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by sexcii-zenki View Post
damn dude that sux major ass...u only had it running 4a month b4 it gave on u, i see u liked the blue i used im taking ur idea on the temp guage...a few questions: with the fire wall what hits the plenum or the throttle body? did u get any vids of the car while u were driving it? did the headers clear the steering rack? can u post up a few more pix of the engine in the bay b4 u ripp it out wana see how the compressor sits since everi1 elses swaps I've seen eliminate it...thanx! good luck on the engine rebuild

also, 4got to add if u decide on not finishing the build, ill buy ur harness so count me 1st...lol!
lol sorry I already pulled the block. took the new pistons, rods and old crank into the machine shop to get the rotating assembly balanced.

But my throttle body hit, not plenum. supposedly I am the only one who has had clearance problems... oh well. the headers actually went AROUND the steering shaft. I had to pull the steering column, instal engine/headers, then slide the column through the headers. PITA!!!
as far as compressor, you talking about the AC? it fit just fine. no problems at all. and it was very cheap to have new custom AC lines made since the vq compressor is in the same location as the KA's.

here is my nitrous build btw.
From a NX 75 shot to a 150 shot! - MY350Z.COM Forums
dorrifto is offline   Reply With Quote
Old 02-05-2012, 05:19 AM   #80
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
iight kool...i was hoping it was the throttle body kuz i hav an idea to fix that to prevent "banging in the firewal", as 4the steering shaft thats great! as long as it doesnt hit is good, I've always done all the swaps from the top in (rb, sr, 5 spd) but since Im getting the car from the bodyshop i dont want to scratch the paint im actually raising it in from the bottom...

good luck with the build...Ill b posting up my thread soon, its been a super slow going process since Nov2010...
sexcii-zenki is offline   Reply With Quote
Old 02-05-2012, 10:34 AM   #81
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by sexcii-zenki View Post
iight kool...i was hoping it was the throttle body kuz i hav an idea to fix that to prevent "banging in the firewal", as 4the steering shaft thats great! as long as it doesnt hit is good, I've always done all the swaps from the top in (rb, sr, 5 spd) but since Im getting the car from the bodyshop i dont want to scratch the paint im actually raising it in from the bottom...

good luck with the build...Ill b posting up my thread soon, its been a super slow going process since Nov2010...
That is a good idea! mount it to the xmember and slide her right in! I would still remove the whole plenum before you do that anyways... just for good measure.

Oh, another problem that no one has mentioned. the plug for the ecu.... it is TOO large to fit through the hole in the firewall while the blower motor is still in place. You have to drop the blower motor to get that gigantic plug to fit through. I ordered a mil spec plug from jordan innovations so I am wiring that beast in so i never have to worry about it again
dorrifto is offline   Reply With Quote
Old 02-05-2012, 05:54 PM   #82
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Niiice! thanx 4the heads up on the blower motor removal and yea i was gona install the intake plenum afterwards...when u think ull have that mil pec plug in? i wana c it installed
sexcii-zenki is offline   Reply With Quote
Old 02-05-2012, 07:26 PM   #83
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by sexcii-zenki View Post
Niiice! thanx 4the heads up on the blower motor removal and yea i was gona install the intake plenum afterwards...when u think ull have that mil pec plug in? i wana c it installed
whenever the hell jordan innovations ships the damn thing! He doenst reply to my pm's for a couple days and I paid over a week ago.
dorrifto is offline   Reply With Quote
Old 02-05-2012, 09:17 PM   #84
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
not good, i pmd them 2set up a date to do my harnes...def keep me posted on his reliability
sexcii-zenki is offline   Reply With Quote
Old 03-09-2012, 12:52 PM   #85
1jzs14
Leaky Injector
 
Join Date: May 2009
Location: midlothian tx
Age: 32
Posts: 89
Trader Rating: (1)
1jzs14 is an unknown quantity at this point
Feedback Score: 1 reviews
they have my harness and i haven't heard a damn thins supposed to ship it to me earlier this week never heard a damn thing back from Jordan innovations
1jzs14 is offline   Reply With Quote
Old 03-10-2012, 06:54 PM   #86
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by 1jzs14 View Post
they have my harness and i haven't heard a damn thins supposed to ship it to me earlier this week never heard a damn thing back from Jordan innovations
He might be out of town. that was why I didnt hear anything from him for awhile. I got all my stuff from him finally once he got back in town.
dorrifto is offline   Reply With Quote
Old 03-14-2012, 01:50 AM   #87
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Update

FINALLY got some work done on the car. life can be distracting sometimes.

96 mm Darton sleeves!

Wiseco pistons to match, and eagle rods to throw


Over the past week, I got the block completely assembled.


Bought some mil-spec plugs from Jordan Innovations to make wiring through the firewall a little cleaner and less painful.

marked all wires

Begin soldering

aaand done


DIY wiring tuck, EASY MODE




Ran it all under the intake mani. I doubled up all my extra long wires down here too to keep them out of the way

I dont know how hot it would get so I wrapped it in heat wrap.


picked up an oil catch can today



Going to work on it more tomorrow. Hope to have it done by this weekend.
dorrifto is offline   Reply With Quote
Old 03-14-2012, 06:22 AM   #88
sexcii-zenki
Zilvia Junkie
 
sexcii-zenki's Avatar
 
Join Date: May 2011
Location: neu joyzee
Posts: 357
Trader Rating: (10)
sexcii-zenki is an unknown quantity at this point
Feedback Score: 10 reviews
Looking real good, def post up runnin vids!!!
sexcii-zenki is offline   Reply With Quote
Old 03-14-2012, 07:00 AM   #89
Yellow4g63
Zilvia FREAK!
 
Join Date: Jan 2003
Location: Socal
Posts: 1,451
Trader Rating: (5)
Yellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of light
Feedback Score: 5 reviews
Send a message via AIM to Yellow4g63
Who sleeved the block for you?
__________________

95 240sx RB20 415whp
91 Nx2000 VVL yo
Yellow4g63 is offline   Reply With Quote
Old 03-14-2012, 11:13 AM   #90
dorrifto
Leaky Injector
 
Join Date: Nov 2010
Location: Kansas
Age: 33
Posts: 131
Trader Rating: (1)
dorrifto is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by Yellow4g63 View Post
Who sleeved the block for you?
A local machine shop. I have the same place do all my machine work
dorrifto is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™