levinitup

Hi everyone,

i am new to this website and i am seeking help. tips and opinion base on your own experience. please hear me out. so here's the deal.

i have '92 nissan 240sx with a '98 s14 ka24de engine.

i bought this car with with the ka swapped already. i was told that the clutch was replaced as well.

after driving the car for couple months approx. about 3 - 4 months while cruising at the freeway and i wanted to shift down and i couldnt shift into any gears. so here what happens, i start the car on neutral and tries to step on the clutch pedal and it makes a rattling noise and i cant get it into any gears. so what i ended up doing to get the car home is before starting it i put it to 1st gear and crank it, and it would shoot the car and start driving and i would shift without using the clutch just so i can pick up a little bit of speed.

i have read alot of threads already regarding about the same problem. and i have downloaded a fsm and watch a couple videos on how to change the clutch.

i just want to get more info and tips and what to watch for doing this replacement.

i have purchased a exedy clutch for the '98 ka24de engine.
and i will be resurfacing my flywheel.

i have already tried adjusting the pushrod for the clutch pedal and it didnt work.

please let me know what to exactly what to look for and any tips on how to get the tranny out.

such as what do you recommend for tranny fluid. which rear main seal. which silicone..

TORQUES? for flywheel, pressure plate?

TOOLS: what to use? what should i have on doing this.

i have a experience on how to replace a clutch but not on the s chassis, i also own a '86 corolla and replaced my clutch couple times.

i am planning on doing this tomorrow.

thanks my fellow 240sx drivers.