ls1 swaps with ka radiator ???sss - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

1Badhatch · 05-23-2017, 07:50 AM

Anyone who has done the swap in there s13 or 14 with a ka radiator can u take a coat hanger bend it to shape and give measurements of each bend so I can go buy the right hoses please

smellslikecurry · 05-23-2017, 08:23 AM

http://www.enjukuracing.com/products...-hose-kit.html

or check this link for info on parts store hoses

http://www.silviav8forums.com/forum/...er=asc&start=0

onehundredoctane · 05-24-2017, 07:13 AM

Be careful with the KA radiator on the LS swap. . . the inlet and outlet for the hoses being on the same side of the radiator means coolant doesn't spend as much time in the radiator.

If you can, go SR radiator since the inlet and outlet are on opposite sides of the end tanks.

Hope that makes sense. . .

OutlawLui · 06-21-2017, 12:03 PM

Quote:

Originally Posted by onehundredoctane

Be careful with the KA radiator on the LS swap. . . the inlet and outlet for the hoses being on the same side of the radiator means coolant doesn't spend as much time in the radiator.

If you can, go SR radiator since the inlet and outlet are on opposite sides of the end tanks.

Hope that makes sense. . .

wow interesting... never thought of that myself

good info

smellslikecurry · 05-24-2017, 07:17 AM

If you absolutely want to stick with a KA rad, get a good dual pass one.

shaggyjake · 06-06-2017, 10:03 AM

I'm using a mishimoto KA rad on my swap. It's not really holding up to the task. The mishi design is supposedly a cross flow but it seems like a basic down low. The side with the inlet/outlet gets scalding hot and the driver side is almost cool to the touch. I've added an oil cooler, ceramic coated long tubes, and top cooling panels. Hopefully it works out. If you haven't already bought a new radiator, then check out this one:

http://www.optionsauto.com/prodinfo....KOYO-RH020539N

Koyo dual pass with inlet and outlet on the same side.

I plan on upgrading to this soon.

mishimoto · 06-21-2017, 11:59 AM

Quote:

Originally Posted by shaggyjake

I'm using a mishimoto KA rad on my swap. It's not really holding up to the task. The mishi design is supposedly a cross flow but it seems like a basic down low. The side with the inlet/outlet gets scalding hot and the driver side is almost cool to the touch. I've added an oil cooler, ceramic coated long tubes, and top cooling panels. Hopefully it works out. If you haven't already bought a new radiator, then check out this one:

http://www.optionsauto.com/prodinfo....KOYO-RH020539N

Koyo dual pass with inlet and outlet on the same side.

I plan on upgrading to this soon.

Hello shaggyjake

I'm very sorry to hear that you have not been pleased with the performance of your radiator. If you need any assistance please contact us direct at [email protected] and we would be happy to help. Don't forget, every product we make is backed by the Mishimoto Lifetime Warranty.

Have a great day
-Jake
Mishimoto

Relentless240 · 01-04-2018, 11:28 PM

The koyo RH020539N looks nice. Too bad theres no
Npt built into tho. Even the sr20 Koyo has them.
Do the s14 fan mounts fit on this radiator?

*afishysilvia* · 01-05-2018, 05:09 AM

I have a Godspeed 2” KA Rad with mishimoto slim fans. I think the hoses depend on the kit. With my CX Racing kit like the one the OP has, there’s not enough room for any pre bent hoses. I’m using stainless steel tubes with odd ballends to make up the diff.

alwaysnboost · 01-05-2018, 06:31 AM

I have a KA rad from Mishi on a built LS. NO issues at all.

*afishysilvia* · 01-05-2018, 06:46 AM

Quote:

Originally Posted by alwaysnboost

I have a KA rad from Mishi on a built LS. NO issues at all.

You’re also New Jersey Area, which I bet doesn’t get close to the ambient temps on the west coast.

cclark · 03-07-2018, 03:24 PM

I have the Mishimoto KA Rad and Fan shroud, with the Mishi swap hoses. I've fabricated the Mishi Water Temp Sensor Adapter fitting to bypass the LS steam port.

*afishysilvia* · 03-07-2018, 03:28 PM

I have a Godspeed radiator with mishi slim fan and shroud. So far not impressed with it, need to play with fan speed and when they come on during tune then I’ll decide. For now I have an added SPAL pusher fan on the front.

05-23-2017, 07:50 AM	#1
1Badhatch Zilvia Junkie Join Date: Oct 2013 Location: Moreno valley California Age: 30 Posts: 392 Trader Rating: (2) Feedback Score: 2 reviews	ls1 swaps with ka radiator ???sss Anyone who has done the swap in there s13 or 14 with a ka radiator can u take a coat hanger bend it to shape and give measurements of each bend so I can go buy the right hoses please

05-23-2017, 08:23 AM	#2
smellslikecurry Post Whore! Join Date: May 2003 Location: bangladesh Age: 35 Posts: 4,588 Trader Rating: (33) Feedback Score: 33 reviews	http://www.enjukuracing.com/products...-hose-kit.html or check this link for info on parts store hoses http://www.silviav8forums.com/forum/...er=asc&start=0 __________________

05-24-2017, 07:17 AM	#5
smellslikecurry Post Whore! Join Date: May 2003 Location: bangladesh Age: 35 Posts: 4,588 Trader Rating: (33) Feedback Score: 33 reviews	If you absolutely want to stick with a KA rad, get a good dual pass one. __________________

03-07-2018, 03:24 PM	#12
cclark Zilvia Member Join Date: Apr 2012 Location: Danbury, CT Posts: 163 Trader Rating: (1) Feedback Score: 1 reviews	I have the Mishimoto KA Rad and Fan shroud, with the Mishi swap hoses. I've fabricated the Mishi Water Temp Sensor Adapter fitting to bypass the LS steam port. __________________ Check out my build: https://zilvia.net/f/showthread.php?p=6248522

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-24-2017, 07:13 AM	#3
onehundredoctane Post Whore! Join Date: Oct 2006 Location: Greensborough, NC Posts: 2,783 Trader Rating: (3) Feedback Score: 3 reviews	Be careful with the KA radiator on the LS swap. . . the inlet and outlet for the hoses being on the same side of the radiator means coolant doesn't spend as much time in the radiator. If you can, go SR radiator since the inlet and outlet are on opposite sides of the end tanks. Hope that makes sense. . .

06-06-2017, 10:03 AM	#6
shaggyjake Zilvia Member Join Date: Dec 2014 Location: Texan in California Age: 31 Posts: 157 Trader Rating: (1) Feedback Score: 1 reviews	I'm using a mishimoto KA rad on my swap. It's not really holding up to the task. The mishi design is supposedly a cross flow but it seems like a basic down low. The side with the inlet/outlet gets scalding hot and the driver side is almost cool to the touch. I've added an oil cooler, ceramic coated long tubes, and top cooling panels. Hopefully it works out. If you haven't already bought a new radiator, then check out this one: http://www.optionsauto.com/prodinfo....KOYO-RH020539N Koyo dual pass with inlet and outlet on the same side. I plan on upgrading to this soon.

01-04-2018, 11:28 PM	#8
Relentless240 Zilvia FREAK! Join Date: Mar 2011 Location: Mission Hills Posts: 1,165 Trader Rating: (50) Feedback Score: 50 reviews	The koyo RH020539N looks nice. Too bad theres no Npt built into tho. Even the sr20 Koyo has them. Do the s14 fan mounts fit on this radiator?

01-05-2018, 05:09 AM	#9
afishysilvia Premium Member Join Date: Jan 2010 Location: Cali Posts: 3,372 Trader Rating: (30) Rides Gallery: afishysilvia Feedback Score: 30 reviews	I have a Godspeed 2” KA Rad with mishimoto slim fans. I think the hoses depend on the kit. With my CX Racing kit like the one the OP has, there’s not enough room for any pre bent hoses. I’m using stainless steel tubes with odd ballends to make up the diff.

01-05-2018, 06:31 AM	#10
alwaysnboost Zilvia Member Join Date: Sep 2015 Location: Morris County Posts: 279 Trader Rating: (1) Feedback Score: 1 reviews	I have a KA rad from Mishi on a built LS. NO issues at all.

03-07-2018, 03:28 PM	#13
afishysilvia Premium Member Join Date: Jan 2010 Location: Cali Posts: 3,372 Trader Rating: (30) Rides Gallery: afishysilvia Feedback Score: 30 reviews	I have a Godspeed radiator with mishi slim fan and shroud. So far not impressed with it, need to play with fan speed and when they come on during tune then I’ll decide. For now I have an added SPAL pusher fan on the front.