ARP flywheel bolts - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

LtSlayer · 03-01-2021, 02:45 PM

I swapped my clutch set up and put in ARP flywheel bolts according to instructions below the recommended fsm torque spec. I torqued to 70 ft-lbs with threadlocker on the thread and lube on the head, is this correct? I'm kinda spooked because it's a fairly aggressive 6 puck with a relatively strong pressure plate. all good?

*brndck* · 03-01-2021, 04:06 PM

ummmmmm
https://tech.arp-bolts.com/instructions/102-2803.pdf

LtSlayer · 03-01-2021, 04:35 PM

ik this but im saying it's below factory spec. i forgot to link it in the first post

smoked240 · 03-01-2021, 11:12 PM

Quote:

Originally Posted by LtSlayer

ik this but im saying it's below factory spec. i forgot to link it in the first post

Factory spec is for factory bolts. Follow what ARP recommends for their hardware.

shoottothrill · 03-02-2021, 11:24 AM

Yeah agree with smoked, always use part manufacturers recommendation. That's what I did when I installed my arp flywheel bolts and have had no issues

Kingtal0n · 03-10-2021, 04:15 PM

Also. Those clutches are garbage.

Get an Ogura single plate, it will last 6x longer and not destroy it's fly wheel after 10k miles

LtSlayer · 03-10-2021, 04:22 PM

what clutch is bad? no one has really mentioned a clutch brand yet. are you referring to the 6 puck style?

smoked240 · 03-10-2021, 04:25 PM

Quote:

Originally Posted by Kingtal0n

Also. Those clutches are garbage.

Get an Ogura single plate, it will last 6x longer and not destroy it's fly wheel after 10k miles

The price also reflects that. Great clutch but you are paying for the quality.

I have a Spec stage2+ and it's been great for 7 years at $400.

LtSlayer · 03-10-2021, 04:31 PM

that's what I'm saying lol. might have to sell the car to finance real estate investment though

03-01-2021, 02:45 PM	#1
LtSlayer Leaky Injector Join Date: Jul 2020 Location: Norco Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	ARP flywheel bolts I swapped my clutch set up and put in ARP flywheel bolts according to instructions below the recommended fsm torque spec. I torqued to 70 ft-lbs with threadlocker on the thread and lube on the head, is this correct? I'm kinda spooked because it's a fairly aggressive 6 puck with a relatively strong pressure plate. all good?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-01-2021, 04:35 PM	#3
LtSlayer Leaky Injector Join Date: Jul 2020 Location: Norco Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	ik this but im saying it's below factory spec. i forgot to link it in the first post

03-02-2021, 11:24 AM	#5
shoottothrill Leaky Injector Join Date: Jan 2020 Location: Arizona Age: 28 Posts: 86 Trader Rating: (1) Feedback Score: 1 reviews	Yeah agree with smoked, always use part manufacturers recommendation. That's what I did when I installed my arp flywheel bolts and have had no issues

03-10-2021, 04:15 PM	#6
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 38 Posts: 4,646 Trader Rating: (17) Feedback Score: 17 reviews	Also. Those clutches are garbage. Get an Ogura single plate, it will last 6x longer and not destroy it's fly wheel after 10k miles

03-10-2021, 04:22 PM	#7
LtSlayer Leaky Injector Join Date: Jul 2020 Location: Norco Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	what clutch is bad? no one has really mentioned a clutch brand yet. are you referring to the 6 puck style?

03-10-2021, 04:31 PM	#9
LtSlayer Leaky Injector Join Date: Jul 2020 Location: Norco Posts: 68 Trader Rating: (0) Feedback Score: 0 reviews	that's what I'm saying lol. might have to sell the car to finance real estate investment though