Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Rb26kouki · 09-11-2013, 02:40 PM

I have a 95 s14 with obd1 I got a complete motor harness & automatic ECU from a 96 obd2

Did the complete engine swap but for some reason there's no starter signal
I check the starter signal fuse on the driver side kick panel Check the clutch switch bypassed it with a wire
& nothing I checked with a fuse tester & all fuses have power but the starter signal 7.5 amp fuse. When I turn the ignition switch I can hear all relays next to the fuse box click on a off
I also replaced the ignition switch & nothing. I can turn over the starter by touching a wire from the connector to the battery & the car starts.

Any help? Could it be something Im missing when I changed to obd1 to obd2 ?

09-11-2013, 02:40 PM	#1
Rb26kouki Zilvia FREAK! Join Date: Apr 2012 Location: Commerce Age: 29 Posts: 1,456 Trader Rating: (62)	S14 No Starter Signal! HELP I have a 95 s14 with obd1 I got a complete motor harness & automatic ECU from a 96 obd2 Did the complete engine swap but for some reason there's no starter signal I check the starter signal fuse on the driver side kick panel Check the clutch switch bypassed it with a wire & nothing I checked with a fuse tester & all fuses have power but the starter signal 7.5 amp fuse. When I turn the ignition switch I can hear all relays next to the fuse box click on a off I also replaced the ignition switch & nothing. I can turn over the starter by touching a wire from the connector to the battery & the car starts. Any help? Could it be something Im missing when I changed to obd1 to obd2 ?