Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

turboconchs · 12-30-2011, 11:53 AM

Hey guys I have a small problem with the H3 harness:
H3 Remote Start Harness

H3/1 Pink (+) Ignition 1 input/output --> to white, ignition harness car side BLACK/RED at ignition harness
H3/2 Red/White (87) Flex Relay input (30A Fused) --> not used WHITE at ignition harness (the one that test as 12volt constant)
H3/3 Orange (+) Accessory output --> not used??? CORRECT
H3/4 Violet (+) Starter output car side --> to black/yellow, ignition harness car side CORRECT
H3/5 Green (+) Starter input key side --> to black/yellow, ignition harness key side CORRECT
H3/6 Red Ignition 1 input (30A fused) --> to white, ignition harness key side WHITE at ignition harness (the one that test as 12volt constant)
H3/7 Pink/White (30) Flex Relay output --> ????? Cut the non constant 12v WHITE wire at ignition harness, this goes to NON key side
H3/8 Pink/black (87a) Flex relay input --> ????? Cut the non constant 12v WHITE wire at ignition harness, this goes to key side
H3/9 Red/black accessory/starter relay input (30A fused) --> ????? WHITE at ignition harness (the one that test as 12volt constant)

NOTE: You must set Menu 3, item 8 to option 2. This will set the Flex Relay for Accessory2

I tried following this but I am not sure which ones from my car's harness I have to cut. I understand all the heavy red striped or not goes to 12V constant. So for example, the H3/1 Pink (+) Ignition 1 input/output and H3/6 Red Ignition 1 input (30A fused). Do I need to cut my ignition wire in half and connect the pink to the non-key cylinder side and the Red to the key cylinder side? And the same goes for the starter connection? Do I need a relay for my remote start to work? Any help will be appreciated. Thanks.

12-30-2011, 11:53 AM	#79
turboconchs Join Date: Dec 2011 Location: Trinidad Age: 31 Posts: 1 Trader Rating: (0)	H3 Harness Hey guys I have a small problem with the H3 harness: H3 Remote Start Harness H3/1 Pink (+) Ignition 1 input/output --> to white, ignition harness car side BLACK/RED at ignition harness H3/2 Red/White (87) Flex Relay input (30A Fused) --> not used WHITE at ignition harness (the one that test as 12volt constant) H3/3 Orange (+) Accessory output --> not used??? CORRECT H3/4 Violet (+) Starter output car side --> to black/yellow, ignition harness car side CORRECT H3/5 Green (+) Starter input key side --> to black/yellow, ignition harness key side CORRECT H3/6 Red Ignition 1 input (30A fused) --> to white, ignition harness key side WHITE at ignition harness (the one that test as 12volt constant) H3/7 Pink/White (30) Flex Relay output --> ????? Cut the non constant 12v WHITE wire at ignition harness, this goes to NON key side H3/8 Pink/black (87a) Flex relay input --> ????? Cut the non constant 12v WHITE wire at ignition harness, this goes to key side H3/9 Red/black accessory/starter relay input (30A fused) --> ????? WHITE at ignition harness (the one that test as 12volt constant) NOTE: You must set Menu 3, item 8 to option 2. This will set the Flex Relay for Accessory2 I tried following this but I am not sure which ones from my car's harness I have to cut. I understand all the heavy red striped or not goes to 12V constant. So for example, the H3/1 Pink (+) Ignition 1 input/output and H3/6 Red Ignition 1 input (30A fused). Do I need to cut my ignition wire in half and connect the pink to the non-key cylinder side and the Red to the key cylinder side? And the same goes for the starter connection? Do I need a relay for my remote start to work? Any help will be appreciated. Thanks.