Quote:
Originally Posted by _kris
you gotta program your tach into the module first.
after that, if everything is hooked up properly, you have to set your e-brake up, press the remote start button (if not remote start, i think it's the lock button) on the remote, take the key out of the ignition, get out of the car, and then lock it.
then you can remote start it =D
|
Well, I cut a corner that I know now I screwed up on. I hooked up the H2 Black/White wire before the E-brake switch so it's seeing (+) instead of (-), figured I'd need to hook it up after the switch so its grounded.
Also I gotta double check how I wired up the H2 Brown wire for the Brake Shutdown. When I was testing the remote start, it was giving me 5 flashes, pointing that the brake wire is active. I tested it, pressing the brakes and it gave me 7 flashes, stating that I have not initialized the MT Mode. I'm guessing I tapped the wrong wire on this one too, just like above.
Then I still gotta figure out why my parking lights doesnt blink with the chirp. I jumped the fuse inside the module to (+), I jumped the inside, not the outside 2.
Lastly, I still got my power door lock issue. No clue why its not working, tapped the 3 pin door lock connector. Blue to unlock the Brown wire and Green to lock the Lt Green/White wires at the SECU. Just to make sure, I just tap them and not cut them off correct?
I'm attempting to follow the Installation Points in the quick guide. I've learned the Tach (LED turned constant) and thats about it. Nothing else seems to work. Tried to do a Shutdown Diagnostic, nothing. Clicked on remote start and I get the MT mode not initialized (7 beeps/flashes). Can't do the MT mode initialized (turn the engine on, set the e-brake up, pressed and released the brake, pressed any button on the remote...nothing). Tried going into Programming to set the Menu 3, Item 8, Opt 2...can't even do that. Opened the door, turn the ign on/off, pressed/hold Control Button...nothing beeped.
Needless to say, this thread is gonna be popping for a while till I work my issues out.