|
sweet! and as far as connecting all the wires together what is typically best to use? butt connectors?
also what about
H3/7 Pink/White (30) Flex Relay output --> Cut the non constant 12v WHITE wire at ignition harness, this goes to NON key side
H3/8 Pink/black (87a) Flex relay input --> Cut the non constant 12v WHITE ??wire at ignition harness, this goes to key side -----> there is no white wire on the key side, if i match up the pin with the non key side it's actually a red wire.. refer to pics.
you can see the pink/white wire running to the white wire, is that the correct one? It's white and doesn't test at a constant 12v.
|