Quote:
Originally Posted by mikeroy420
I am trying to wire up two relays off of negative triggers for the trunk popper and the fuel cut. I was just wondering if you could confirm this wiring is correct.
Truck Popper Relay
85- Red/White from alarm (-)
86- 12V from Battery (fused)
30- 12V from battery (fused)
87a- not connected
87- to truck solenoid
Fuel Cut
85- orange wire from alarm
86- black/red ignition at key switch
87a- black/yellow at fuel pump relay or pump
87- not connected
30- 12V fused from battery
|
The trunk relay is correct, but the fuel cut is not. If you want to cut the fuel source, then you will need to interrupt the wire for the pump. So you will cut the fuel pump wire in half and connect one side to 87a and the other side to 30... doesn't matter which side you hook to each. Otherwise 85, 86 and 87 are correct.