View Single Post
Old 12-08-2012, 12:58 PM   #3
ali-d1936
Leaky Injector
 
Join Date: Sep 2010
Location: ireland
Age: 33
Posts: 92
Trader Rating: (0)
ali-d1936 is an unknown quantity at this point
Sept2012
--------------------------------------------------------------
so last week i was detaring the car with thinners (handy for removing tar)
and i wiped the passanger headlight with some thinners on the rag, after a few seconds little tiny Cracks started to appear i ws shitting myself we all know the price of s15 lights!! so they where left like this :shocked:






Looked fairly ****ed if you ask me,
so cheapest replacement i could find was E500 for a pair :afro:

so with nothing to lose (as they looked ****ed anyway) i got a lot of diffrent grade sandpapers and started to work, it started really slow, even at 340 grit by hand nothing was coming off, so bit the bullet,
60 grit on a orbetel sander it still took 2 hours at that to get below the level of the Cracks in the plastic

TBF even at this point it was looking bleek



but started working up the Grades of sand paper, topped off with a 2hour marathon rubbing session with 2500 grit, and a rub of polish...






:afro:
will go back over it again as there are a few rough places where i missed with the higher grades. but TBH it beats paying E500 for second hand scratched lights

now onto the interior
ali-d1936 is offline   Reply With Quote