Quote:
Originally Posted by Flicktitty
I have only used J3 bell housings. i have an extra i'd sell cheap if you're in need.
I used the stock ecu with a mapecu2 for a while, then an AEM EMS V2 and now i'm on a pro-efi 128 setup. I'm not familiar with the smart unit for controlling the trans. If memory serves me right i used the tech2 crossmember with the auto supra mount. i'll have to see if i have any pictures of it.
|
Ok I will keep that in mind we will try the j1 and see where it lands us if it doesn't work out I will at least have my bell housing for when I put my cd009 in. I will do using a link stormX for the engine and it may be able to control the trans as well . The smart 100.1 was intended to be used for my DSM but I'm putting that build off for a while but it is confirmed to work with the a340e . I have a w58 in the car currently but the trans was junk so hopefully my trans mount can be altered to fit the a340e I read it uses the same mount as the r154 but the placement is different.