Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

christianos13 · 02-02-2013, 07:43 PM

.
o mycar started to give me problmes the pedal just dropped to the ground and i see that fluid was by the master cylinder so i changed it out.

and i was wondering about the rod do i have it all the way out then connect it to the pedal. i connected everything and the pedal still dropped.

i also chnaged the slave as well but still the clutch stays on the floor,

is it going to be like that for a while to i bleed it and do i have to do by hand cause it dosent come up at all.

So my questions is on the clutch master clyinder dose the rod have to be all the way out and if so do i have to pump the clutch by hand for a while till pressure bulds up\

and i have a sr20det and i bout the master and salve from auto zone for a 94 240sx ka24de ?? so if any one can help me out plz.

02-02-2013, 07:43 PM	#1
christianos13 Leaky Injector Join Date: Dec 2012 Location: west TX Age: 33 Posts: 60 Trader Rating: (0)	clutch problems pedal dosent come up . o mycar started to give me problmes the pedal just dropped to the ground and i see that fluid was by the master cylinder so i changed it out. and i was wondering about the rod do i have it all the way out then connect it to the pedal. i connected everything and the pedal still dropped. i also chnaged the slave as well but still the clutch stays on the floor, is it going to be like that for a while to i bleed it and do i have to do by hand cause it dosent come up at all. So my questions is on the clutch master clyinder dose the rod have to be all the way out and if so do i have to pump the clutch by hand for a while till pressure bulds up\ and i have a sr20det and i bout the master and salve from auto zone for a 94 240sx ka24de ?? so if any one can help me out plz.