Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

*fliprayzin240sx* · 09-28-2011, 01:07 PM

Well worked some of the wiring out but I'm stomped on the door locks. I double checked the wires and I'm sure it's the right wires. They both have power and gets interrupted when they are switched. The issue is when the plug the 3 pin back into the brain, it's grounding out the unlock. You can hear the stock relay click. I'd lock the doors, the plug the 3 pin in and the doors would unlock, and the signal just stays on. Think it's a bad brain?

Anyways I've managed to get it to remote start ready. It just won't restart. I'll double check the wiring and post up how I wired the spdt.

09-28-2011, 01:07 PM	#71
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19)	Well worked some of the wiring out but I'm stomped on the door locks. I double checked the wires and I'm sure it's the right wires. They both have power and gets interrupted when they are switched. The issue is when the plug the 3 pin back into the brain, it's grounding out the unlock. You can hear the stock relay click. I'd lock the doors, the plug the 3 pin in and the doors would unlock, and the signal just stays on. Think it's a bad brain? Anyways I've managed to get it to remote start ready. It just won't restart. I'll double check the wiring and post up how I wired the spdt. __________________ If you think Zilvia has too many assholes... CLICK HERE!!! Last edited by fliprayzin240sx; 09-28-2011 at 10:27 PM..