Quote:
Originally Posted by Mikester
Wondering if your clutch sleeve is too long for the duralast kit. Did you replace the sleeve & bearing when you put the new clutch in?
|
Quote:
Originally Posted by fliprayzin240sx
^^^Thats what I'm thinking. Shit happened to me before on an ACT clutch. They sent me the wrong TOB and when I put it on the the stock carrier, the setup was too tall. Clutch is basically permanently preloaded so it wouldnt disengage and would slip. I had to drop the tranny, tossed in a shorter Z32 TOB and fixed my issue.
|
Quote:
Originally Posted by Dboyizmlg
If you had not gotten you're problem solved yet, here's some thing to know!
Auto zone products SUCK! They are Nooo good!
Every thing you mentioned sounds good to me, that's if you installed it correctly.
I believe it's the clutch, I know it's New but thats your problem!
|
that's exactly what it felt like, it felt like the clutch was permanently preloaded so it wouldnt disengage and it would slip, that explains my problem accurately.
well i swapped the clutch kit again with another autozone one cause it comes with a lifetime warranty and the new set looks different. i put that in the other day and my car is finally driveable, however, it still slips when i step on the pedal more. not flooring it or anything, but it still slips a bit. i compared the new tob to the oem one in my car and it does look longer, i didnt know that the z32 had a slimmer one, i woulda gone with that lol.
but ya, i agree, the duralast clutch sucks! i never want to buy anything from autozone anymore. im just gona start saving up for an exedy stage 1 kit at least.
does anyone know how to make the clutch pedal stiffer? it is super soft! lol.