Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

racers4life77 · 02-04-2013, 02:37 PM

I had the same issue with 3 of my remanufactured CM cylinder from the parts store. So i decided to tear each of them down and find out what was failing.
Attached to the piston is a valve that lets fluid in when you let go of the pedal, this little valve went bad in all 3 of my reman CMC in my car in less then a year, very frustrating!
So i bought a( MASTER CYLINDER REPAIR KIT) for about $18 from Nissan and put in the reman cylinder and works perfect.

02-04-2013, 02:37 PM	#53
racers4life77 Join Date: May 2006 Location: tampa Posts: 24 Trader Rating: (0)	I had the same issue with 3 of my remanufactured CM cylinder from the parts store. So i decided to tear each of them down and find out what was failing. Attached to the piston is a valve that lets fluid in when you let go of the pedal, this little valve went bad in all 3 of my reman CMC in my car in less then a year, very frustrating! So i bought a( MASTER CYLINDER REPAIR KIT) for about $18 from Nissan and put in the reman cylinder and works perfect.