Quote:
Originally Posted by xNCDUBx
I just got a s14 with a sr20 blacktop in it. Im trying to get around 400 hp out of it. What parts would be needed to produce somewhere around 400 hp? Any help on this would be great.
|
Don't listen to people who say 2871R, unless they mean Brake HP (or at the flywheel).
Some people have been able to pull off 400whp on the dot with the smaller varient but it is more the exception than the rule.
I suggest looking into the 50 Trim T04E compressor wheel with a T3 turbine housing, these turbos are extremely affordable if you don't mind going with a simple top mount manifold setup.
The other suggestion I have is the GT3071R or GT3076R bottom mount varient, we have tuned a few up to 430-450 whp!!! on Stock bottom end and on a dyno dynamics (hear breaker dyno).
Just some other things to keep i mind.
Most important of all is TUNING TUNING TUNING.
Whether is be local tuner, or high quality wideband to fine tune the fuel map, and getting a solid timing map from a map builder, or doing some serious dyno time with a tuner who knows his EFI. Tuning makes all the difference in longevity, low end power and power band curve and peak power.