Quote:
Originally Posted by japslapsilvia
The inner race (old bearing) is stuck on the spindle, The new bearing should sit all the way on the spindle. How did you even get the spindle nut on?
|
wow, i thought that's how the spindle looked when the old hub came off. so that means the inner race was on my new hubs then. the new hub did sit all the way on the spindle, but only when i took off the inner race on the new hubs which explains why it didn't wanna seat all the way in when i left that inner race in the new hubs. the pic i showed it not seating all the way was just to show how it wouldn't go all the way on the spindle.
it took little effort to shake the wheel on all sides even before i drove on them so that's what i thought it was. what would cause the wheel to shake so much? front hubs are new and although they are hubs from ebay, i never seen them shake right after installation.