Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Darkcr3w · 01-21-2014, 09:28 AM

I know no one has gotten back to us but I have learned that both the G35 and the S13 both have the same center bore sizes.
S13 center bore is 66.1mm
G35 center bore is 66.1mm

So it will fit. However now I want to know if I can use my 300zx rotors on the G35 hubs. I read that both the G35 and the 300zx have the same rear rotor size
The G35 is a 11.6 vented rotor
The 300zx is a 11.6 vented rotor

Unless someone has a definite answer I may just try it out to see if it will all work and make a write up if so.

01-21-2014, 09:28 AM	#3
Darkcr3w Zilvia Member Join Date: May 2013 Location: FL Age: 25 Posts: 289 Trader Rating: (4)	I know no one has gotten back to us but I have learned that both the G35 and the S13 both have the same center bore sizes. S13 center bore is 66.1mm G35 center bore is 66.1mm So it will fit. However now I want to know if I can use my 300zx rotors on the G35 hubs. I read that both the G35 and the 300zx have the same rear rotor size The G35 is a 11.6 vented rotor The 300zx is a 11.6 vented rotor Unless someone has a definite answer I may just try it out to see if it will all work and make a write up if so. Last edited by Darkcr3w; 01-21-2014 at 12:35 PM..