|
Yes a KA trans with the sr bell housing will work. But for simplicity sake buy the sr trans.
Also the ka ecu is a no go, and buy the wiring specialities harness. That way your not dealing with someone hack job harness that might cause problems.
When your buying the motor, take everything they give you, don't say no to parts. Iv sold a motor before and he didn't want the harness, on that harness was an ignition coil (100-200$) you don't want to make a mistake like that.
Also don't forget to upgrade your fuel pump. I use a walbro 225.
To get your speedo and tach to work you will need a dual cam tach and signal cam speedo. So get both clusters. And either swap the speedo or the tach. And use a ka speed sensor.
And another common mistake is people use a 240sx fuel filter.
You want the z32 fuel filter. It will mount up to the stock location.
That's just a few things, if I'm wrong please feel free to correct me
Sent from my iPhone using Tapatalk
|