TPS seemed a little low. was at around 0.41v.
I had a new TPS on hand so decided to just switch it out completely.
Set it at 0.45v for the time being. Will probably raise it up a bit more.
FYI, when replacing the TPS, you need to unbolt the Throttle Body so make sure you get a new throttle body mounting gasket.
Engine's running fine now. no bogging, no issues with anything.
I was wondering though.. the FSM says the TPS voltage should be .45v to .55v closed throttle.
From your guys experience, would setting it at .50v be ok?
I know it sounds like a stupid question but at .43-.44v my engine seems to be running ok and im just wondering if setting it at .5v will be giving it too much air..
