Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - broke tip of roof wing, How do i go about fixing it

aga · 07-31-2013, 02:22 AM

use putty with fiberglass fibers in it ( i think its called kitty hair over there)... depending on how big the missing chunk is , you might need something to support it. anyway its gonna be a bitch to sand so you d better have a rotary sander or a ton of patience (or a dremel tool with 80grit disc) , and then you will use a thinner polyester putty for detail. then primer, sand again, paint. that's a lot of materials for such a small damage, costing around 20-30 bucks, so unless you have them lying around, take a dremel and shape the cut as if someone bit it off , that will make a conversation starter.

07-31-2013, 02:22 AM	#6
aga Zilvia Junkie Join Date: Mar 2013 Location: Athens, Greece Age: 43 Posts: 580 Trader Rating: (0)	use putty with fiberglass fibers in it ( i think its called kitty hair over there)... depending on how big the missing chunk is , you might need something to support it. anyway its gonna be a bitch to sand so you d better have a rotary sander or a ton of patience (or a dremel tool with 80grit disc) , and then you will use a thinner polyester putty for detail. then primer, sand again, paint. that's a lot of materials for such a small damage, costing around 20-30 bucks, so unless you have them lying around, take a dremel and shape the cut as if someone bit it off , that will make a conversation starter.