|
I made my own. I measured the sizes of the old rubber one, and bought a piece of rolled high tensile steel threaded rod, plexiglass, grade 8 nuts, 2.5 inch exhaust pipe, poly mold release, and some 90 duro poly. I cut the exhaust pipe the thickness i wanted, put the rod through, fille with poly, and sandwiched with the plexiglass. clamped them tight and let them set, and they popped right out. I'll do a wriet up and post some pics later today. they are great. nice and solid, but not harsh at all. the poly dampens well. Great feel and smooth power delivery.
|