|
Please post this in Engine Tech next time so I can see it and help you out faster.
This is definitely an issue with power in your wiring not getting to where it needs to go so it could be possible the harness plug is not snug into its seat but also check your ECCS relay wire, it's a thin red wire with black line and it should be wired up on both sides by the battery area. If it is not wired up then you should wire it up
You could also get an ECU pin out and check all eccs or ecu power wires with the key on for power.
Once you get it working be sure to contact me before the end of this month to take advantage of my discounted rates for remote tune/base map service for your unit also
|