Thread: EGI/ EGI pump
View Single Post
Old 04-10-2011, 06:33 PM   #4
holemilk00
Premium Member
 
holemilk00's Avatar
 
Join Date: Oct 2006
Location: Cape Coral, FL
Posts: 2,485
Trader Rating: (33)
holemilk00 is a jewel in the roughholemilk00 is a jewel in the roughholemilk00 is a jewel in the roughholemilk00 is a jewel in the roughholemilk00 is a jewel in the roughholemilk00 is a jewel in the roughholemilk00 is a jewel in the rough
Just clean everything up. Leave the grounds where they are and make sure they have good contact. Yes them coming loose would cause the car to cut off. Go through the process for a minute. If the relay keeps the fuel pump running, and a relay works with power and ground, and it loses that ground, it will disengage and the fuel pump will stop. Once the fuel pressure in the lines gets used up by the injectors, the engine will stop. What I would watch for is with the relay cutting in and out, it can burn up a fuel pump. If you clean everything up, make sure you have good metal to make contact with, and tighten everything back down, you should be fine.
__________________
I had a cool signature
holemilk00 is offline   Reply With Quote