Thanks! That’s actually the same pinout I used but thought it was questionable on the ign relay. After tracing it out I’m pretty sure that’s right. I’m not getting injector power to injector subharness. I do have injector power from ecu, it’s just not getting to injector harness. I Jumped power to injector subharness and it fires right up. I traced the gray injector power wire from inj harness and it’s going to an 8 pin plug (with 6 pins and 2 open spaces) on pass side of engine bay. Only other wire that I identified in that plug is neutral position switch. I’ll jump power to injector harness if I have to, but I’d really rather find correct wire routing. Anyone have input? I’ll attach pics of the plug I’m talking about.
[IMG]
[/IMG][IMG]
[/IMG]