Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

on3lv3 · 03-04-2018, 10:17 PM

HELP!!!

ECU NOT GETTING POWER...

-I went through the entire FSM procedure to test the ECU/Engine harness grounding and power, continuity etc.
-With power on there is no power to pin 49/59
-All grounds going into the ecu have continuity
-tested the ECCS relay (bench test and swapped in another.
-car runs and starts by hardwiring the relay.

Am I missing a ground somewhere?

Here are my assumptions (please correct me if I am wrong)
-ECU is fine
-wiring/engine harness is fine
-relays are fine

03-04-2018, 10:17 PM	#1
on3lv3 Leaky Injector Join Date: Feb 2009 Location: las vegas Posts: 80 Trader Rating: (1)	Sr20/PFC: ECU not getting power HELP!!! ECU NOT GETTING POWER... -I went through the entire FSM procedure to test the ECU/Engine harness grounding and power, continuity etc. -With power on there is no power to pin 49/59 -All grounds going into the ecu have continuity -tested the ECCS relay (bench test and swapped in another. -car runs and starts by hardwiring the relay. Am I missing a ground somewhere? Here are my assumptions (please correct me if I am wrong) -ECU is fine -wiring/engine harness is fine -relays are fine