Quote:
Originally Posted by LtSlayer
how much power are you putting down? That heat range is a bit high but I also don't know your setup or psi
|
Running a SR20VE head with Kelford cams 184ST, supertech valvetrain. 1050 injector dynamics. Boosting around 1.6bar. About 380whp on a mainline dyno
Got the cams installed and tuned in June, ran beautiful for 4 months until this issue popped up. Pulled the plugs and found that number 3 is running hotter than the rest.
Sent the injectors for a test and clean. Seems to be spraying evenly and equally.
I would suppose this issue to be more consistent if it has something to do with the valves? It seems to only occur when the engine is hot and it comes and goes.