|
If you have stock tension rods more than likely you will have tons of play causing a pull during braking replacing those with some nice aftermarket ones will cure the problem if its related to those arms. I would start there, cuz that will rule out the tension rod problem. Then If the problem persists then go thru the braking system by measuring your rotors and looking your pads and look for differences in both sides. Also mabe time to upgrading the braking system like Q45, Z32, or brembo, dot4 and ss brake lines and some new slotted rotors to make sure that the braking system is out of question. I got some Energy suspension rack bushings will help but doubt that will be the problem. But good luck, PS, Q45s with drilled and slotted rotors will stop quicker then your passenger slamming into your dash. Cheers
|