|
You can set idle higher the time needed to set timing, the ECU keeps commanding 15° until you go past 2000~2200rpm (AND if tps switch detects throttle closed). Not sure disconnecting the TPS is a good idea, it may send it to limp mode. You can check your tps switch is working, if memory serves it uses a switch to "see" idle , and a potentiometer to check throttle opening. I dont remember the values but it should be pretty easy to check if the resistor value changes when manually opening the throttle. Same goes for the switch. Do this check when engine is off, no contact, you dont want power there as you are checking for resistance.
|