Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Resident · 09-15-2019, 05:29 PM

Alright here's the question I posed to all of you. I have completely read the 300ZX swap guide but I'm running into one issue which comes to the master cylinder. Being that the 180sx is a right hand drive vehicle there is not enough clearance at the shock tower for the hard brake lines to clear.

Is there a another 1 inch or 17/16 bore master cylinder that has th. hard line inputs facing the passenger side of the car? Speaking about the passenger side of the180sx of course.

09-15-2019, 05:29 PM	#1
Resident Join Date: Jun 2018 Location: Pennsylvania Posts: 33 Trader Rating: (0)	300zx swap on a180SX Alright here's the question I posed to all of you. I have completely read the 300ZX swap guide but I'm running into one issue which comes to the master cylinder. Being that the 180sx is a right hand drive vehicle there is not enough clearance at the shock tower for the hard brake lines to clear. Is there a another 1 inch or 17/16 bore master cylinder that has th. hard line inputs facing the passenger side of the car? Speaking about the passenger side of the180sx of course.