Thread: Differential output shafts and axles/cv boots
View Single Post
Old 03-18-2014, 04:54 PM   #3
Atill93
Leaky Injector
 
Join Date: Jul 2012
Location: Alabama
Age: 28
Posts: 144
Trader Rating: (0)
Atill93 is making his/her stupidity well-knownAtill93 is making his/her stupidity well-knownAtill93 is making his/her stupidity well-knownAtill93 is making his/her stupidity well-known
Quote:
Originally Posted by jr_ss View Post
You should have two different length output shafts with the VLSD, however, I do not know which side it should be installed on. Intuition tells me the passenger side gets the longer shaft, but that may be completely wrong as I have never dealt with a VLSD. It's a 50/50 chance, if it doesn't seat all the way on one side, pull it out and install it on the other.

If you have 6 bolt axles in your car, you do not need to swap them out. If those are your axles, take it to a local shop to have them swap out the boots.
i've tried both sides with the output shafts. and i measured the diff and it looks like each side is the same depth..

i already have the cv boots, i was hoping to do it myself. are the axles difficult to get apart?
Atill93 is offline   Reply With Quote