And after that..
The lower harness
The lower harness--fusebox wiring
Misc. relays and stuff lol
Now to get wrapped..and the rest of the bay done
And don't worry about the frame rail/everything else I'm going to be replacing that section and also doing tubs before the bay gets finished.
I disconnected the main harness from the pass. side kick panel and pulled it all the way out. It was then rerouted on the otherside(outside) of the rad support and front end metal. And the hole I discovered in the frame rail...just another thing to add to the list to do.
And as you can see the lower harness now runs outside of the bay too. It will be run on either the top of the bottom of the pinch weld from the frame rail. The alt. wires will come up through the bottom in front of the subframe and the lower radiator plug will be the same pretty much.
Since I haven't had a windshield washer bottle in the car since I've owned it I think I'm going to remove all the wiring. The harness on the left is all that wiring.
The driver side of the harness and relays that I need to find a place to hide.
Still need to solder the fuse box back on but the wires are almost the correct length lol
Misc. harness that have to be cut still
