Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - This is the roll center, suspension pickup, and steering angle modification thread.

derass · 03-16-2018, 02:06 PM

I tried exactly that for more TC rod / sway bar clearance at full lock. 17x9 +20 with a 35mm spacer.

Even with the spacers, the wheels would still hit the TC/sway, but now with the added downside of rubbing the front and back of the fender going from lock to lock, and also the back of the inner wheel well (firewall).

I didn't even attempt to drive it like that.

03-16-2018, 02:06 PM	#7584
derass Zilvia FREAK! Join Date: Jun 2010 Location: Toronto, ON Age: 33 Posts: 1,182 Trader Rating: (0)	I tried exactly that for more TC rod / sway bar clearance at full lock. 17x9 +20 with a 35mm spacer. Even with the spacers, the wheels would still hit the TC/sway, but now with the added downside of rubbing the front and back of the fender going from lock to lock, and also the back of the inner wheel well (firewall). I didn't even attempt to drive it like that.