Quote:
Originally Posted by fliprayzin240sx
But you said "But will also jump to the Black/White at IGN Harness", do I have to do anything else with that wire other than making the SPDT relay?
|
Sorry, I forgot to remove that part when I made the edit about adding the relay. Do not jump to the black/white wire. That was only a "poor" man's way of doing it. But come to find out it makes the starter kill feature not work correctly. So I changed the write-up to reflect using a relay instead. Also, never solder to a relay. Too much heat on the pin can affect the inner workings
As for your ground, where you have it is fine!