bigturbo3

If there is already a defined thread on this, please let me know. I have been looking through multiple posts and other forums and I see some conflicting information on what is needed for the 5lug swap on an s13.

I have found information stating you need:
Front:
S14 Spindles
S14 Lower control arms
S14 Rotors
S14 Hubs

Rear:
S14 Hubs
S14 Rotors

I have also found that the hubs themselves are interchangeable from the s14 SE.

I already have modified knuckles, extended s13 LCAs, s14 inner and outer tie rods and do not want to get rid of those. Is it required to get the knuckles and LCAs from the s14 or can the hub simply be swapped?

I also found information that you can buy the Ichiban or Isis 5 lug conversion but the bearings are junk.

What options do I have here so I can keep my modified knuckles and LCAs but still go 5 lug with big brakes?

Thanks guys