Quote:
Originally Posted by KiLLeR2001
I PM'd you this yesterday but I'll post it here so there won't be a repeat question...
I was browsing through the interior thread and noticed a digital fuel gauge you did for somebody...
http://tehl33tsite.com/240sxdd/help/digifuel.jpg
My first question to you is, where can I find a gauge like this that will display fuel in either % remaining or gallons remaining? I tried looking online and can't really find anything.
Question #2. I plan on locating it here...
http://tehl33tsite.com/240sxdd/help/fuelloc.jpg
But I'm not sure if there is enough space on the top region to place a circular gauge since I only want to expose the digital number through that section in form of a rectangle.
Any tips or tricks to go about this little project would be much appreciated.
Thanks. |
I officially like the Autometer one because it's the only one that I have seen that is fully programmable to match whatever sending unit you are using:
Auto Meter
I like to mount them behind smoked plexi. I also disassemble the gauge and paint the inside all black. Otherwise you may see some of the white text though the plexi.
I have done several setups with various techniques:
This first setup is the easiest:
This method is much more difficult because I first had to fill in the spot where the OEM switch was:
Build pics here:
Josh's S13 Cluster, HUD, Center Vent and Cluster Shroud album | Broadfield | Fotki.com, photo and video sharing made easy.
Then an AEM air/fuel gauge I did in an STi:
Build pics here:
Mike Defalco's Vent Gauge STi album | Broadfield | Fotki.com, photo and video sharing made easy.
Quote:
Originally Posted by waxball88
Will i one day be as great as you?
|
That's entirely up to you.... but good luck
