Thread: This is the roll center, suspension pickup, and steering angle modification thread.
View Single Post
Old 04-24-2010, 09:38 PM   #655
S14DB
AFC #1
 
S14DB's Avatar
 
Join Date: Oct 2003
Location: 昨晩あなたのお母さんの家
Posts: 20,181
Trader Rating: (3)
S14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfectionS14DB is close to perfection
Quote:
Get that extreme steering angle you've been missing with KPR Steering Angle Knuckles. Achieve up to 58 degrees of steering angle on the leading wheel and 52 degrees on the trailing wheel with our version 2 knuckles! Comes powder coated in gold.

Nissan S14 or S15 hubs and ball joints must be used to run KPR Steering Angle Knuckles. For the best results use in conjunction with KPR outer tie rod ends, KPR 8mm steering rack spacers, aftermarket inner tie rods, modifications to the factory bump stops and a proper race alignment is NEEDED.

Depending on wheel size and offset and vehicle ride height wheel well clearance modifications and relocating the factory wiring harness from the factory position is highly recommended.
KPR S13/S14/S15 Steering Angle Knuckles
__________________
Comments should be taken as Opinions not as Statements of Fact
S14DB is offline   Reply With Quote