Quote:
Originally posted by mixxamike
With the aftermarket s13 front hubs, what rotors and callipers fit...z32 NA?, turbo? If not, which ones?
|
You can use your Stock S13 calipers with s14 5-lug rotors. If you choose too, you can upgrade to 300zx rotors, with 300zx calipers.
Check here for all the different 300zx calipers:
http://www.princeton.edu/~asad/zbrakes/
Quote:
|
And about the rear hubs, tell me if i'm wrong, but it is possible to just bolt on the z32 rear hubs and then the z32 NA or turbo rear rotors and brakes. Or do i need aftermarket rotors and callipers as well?
|
No just getting the hubs does not allow you to get rear 300zx brakes. There are quite a few other parts necessary.
No you don't need any aftermarket rotors or calipers. Unless you install some other calipers you will need to use S14 5-lug rotors with your stock s13 calipers.
This is really a different discussion all together.
Quote:
One more...is the only purpose for swapping in the z32 allminum uprights just for weight savings or are there more bennefits?
Thanks!
|
Yes. The weight savings is the number one reason. Remember, every 1 pund saved of unsprung weight is equal to 8 punds of sprung weight. Removing unsprung weight helps every part of your suspension work better.