|
Hi, I don't have much to contribute for info, because it is hard to find. I have both an hx35, and an h1c that I found at my scrapyard. Not sure which one I'm putting in yet, but probably the hx35 since it's newer. I bought a much smaller Tim's turbo 0.63 a/r hotside. This should help with the spool compared to the big housing they usually come with.
I decided to get a cast iron top mount manifold, because of the cracking problems people tend to have with the cheaper stainless ones. And I'm hoping the short runners will also help with spool.
From threads I've read (mostly from the UK), use a 3" turbo outlet. Going from a 2.5" outlet, then widening it to the 3" dp really restricts the exhaust.
I have all of the pieces to put the turbo on, but need to get it to my shop. I'm really hoping the spool won't be very laggy, but I'm going for a super budget build, so I can't complain too much since my turbo was free.
Sent from my SM-N910V using Tapatalk
|